4.5
Specify a relay distribution station for transmission (Relay Instruction transmission)
4.5
Specify a relay distribution station for transmission (Relay In-
struction transmission)
The relay instruction transmission is a function that sends an original to a relay distribution station once, and
broadcasts it from the relay distribution station to destinations. When there are multiple jobs to broadcast a
document to distant destinations, group relay distribution stations and relay distribution destinations for each
region, enabling a reduction of the entire communication charge
Tips
-
The relay instruction transmission function supports F-code communication.
-
For a relay distribution station, specify a model compatible with the relay broadcasting. This machine
can be specified as a relay distribution station.
-
The relay instruction transmission cannot be used together with the confidential transmission.
-
To specify the relay instruction transmission , you must register a Relay User Box ID in a relay distribu-
tion station in advance. For details, refer to page 7-19.
1
Load the original.
% For details on how to load the original, refer to page 3-5.
2
When necessary, specify a image quality.
% For details on Quality, refer to page 3-7.
3
Press the Function key.
4
Use the +/, key to select [RELAY INITIATE], then press the OK key.
bizhub 225i
4
4-12