Konica Minolta bizhub 225i User Manual page 36

3.1 Transmission procedure
6
Use the +/, key to select [AUTO DETECTION] or [MANUAL], then press the OK key.
% If [MANUAL] is selected, specify the paper size.
7
To start scanning, press the OK key.
% When changing the scanning paper size, press the ) key to respecify the size.
8
When continuously scanning the original, load the next original, then press the OK key.
% Repeat this procedure until scanning of originals is completed.
9
When scanning of all originals has been completed, press the Start key.
Sending starts.
After sending is completed, a "long beep" sounds.
% To stop sending, press the Clear/Stop key, then select [YES] in the displayed screen.
d
Reference
When necessary, you can cancel sending the scanned document. For details, refer to page 3-20.
If a transmission fails, a transmission result report is printed out. For details, refer to page 3-21.
bizhub 225i
MEMORY
QUALITY:STD/TEXT
NEXT PAGE? (AUTO)
SCAN=OK (TX=START)
3
3-4