Set Custom Monitors - YASKAWA GA800 Series Technical Reference

5.
Push or
6.
Push or
Note:
Push to go back to the previous page.
◆

Set Custom Monitors

You can select and register a maximum of 12 monitoring items to regularly show on the keypad.
This procedure shows how to set the motor speed to [Custom Monitor 1].
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If the keypad does not show [Home] on
2.
Push (Menu).
3.
Push or
4.
Push or
YASKAWA SIEPC71061737B GA800 Drive Technical Reference
to select monitor group, then push
to change the monitor number to show the monitor item.
, push
to select [Monitors], then push
to select [Custom Monitor], then push
.
(Back) to show [Home] on
.
(Setup).
4.6 Keypad Operation
.
4
153