4.6 Keypad Operation
5.
Push
or
6.
Push
or
7.
Push
or
• Push
[Default] to set the parameter to factory default.
• Push
[Min/Max] to show the minimum value or the maximum value on the display.
8.
Push
to keep the changes.
9.
Continue to change parameters, then push
you change all the applicable parameters.
◆
Examine User Custom Parameters
The User Custom Parameters show the parameters set in A2-01 to A2-32 [User Parameter 1 to User Parameter 32].
This lets users to quickly access and change settings to these parameters.
Note:
The User Custom Parameters always show A1-06 [Application Selection] at the top of the list. The A2-01 to A2-32 settings change when the
A1-06 setting changes, which makes it easier to set and reference the necessary parameter settings.
1.
Push
(Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
164
to select [C1 Accel & Decel Time], then push
to select C1-01, then push
to select the specified digit, then push
, push
(Back) to show [Home] on
.
.
or
to select the correct number.
[Back],
[Home] to go back to the home screen after
.
YASKAWA SIEPC71061737B GA800 Drive Technical Reference