Table of Contents
Advertisement
WPC System
USER GUIDE
Rigging WPC with the WPCGRIDt Touring Flying Frame
WPC cabinets conveniently truck fully enclosed in a custom designed Transport Dolly, preconfigured in blocks of four, and are
rigged straight out of the Transport Dolly to provide an extremely fast and streamlined process.
The cabinets travel in the Transport Dolly at maximum curvature. The Transport Dolly is manufactured around a welded
aluminium frame with timber inserts coated in textured paint, and it has nylon skids on the base to support the cabinets
and rubber pads on the underside of the top to hold the four cabinets securely when in transit. After removing the top of the
Transport Dolly and the supporting poles, the WPC array is easily accessible for rigging. Rigging pins are inserted at the holes
required for the cabinet angles as predicted by your DISPLAY 2.3 project, and then the array is lifted so that the angles open
until the rear rigging reaches the stops limited by the rigging pins at the preset angles. A second rigging pin is put in place on
each cabinet to lock the angles so the array can't collapse back down.
Once the array is flown out of the Transport Dolly, the poles can be placed in the bottom section and the top latched on to the
base keeping it compact for storage.
IMPORTANT SAFETY NOTE
The top of the Transport Dolly has the Martin Audio logo milled into it and arrows to indicate that
it must only be pushed in the long direction. The Transport Dolly must not be travelled side-on!
WPC User Guide v1.0
Page 34
Advertisement
Table of Contents
