Martin Audio WAVEFRONT PRECISION WPC User Manual page 43

WPC System
USER GUIDE
” Swing the bottom four cabinets (which will now be a rigid array due to the locking pins) backwards until butted against the
upper half of the array. Insert a pin in the rear rigging bracket at the correct angle. Allow the bottom four cabinets to swing
back down and insert a Rigging Pin at the LOCK position on the fourth cabinet. Connect the cable loom and any link cables
as required to the lower four cabinets.
Fig. 24 - insert rigging pin
WPC User Guide v1.0
Fig. 25 - insert lock pin
Page 43