WPC System
USER GUIDE
Lower the array and engage the front rigging points of the fourth cabinet with the front rigging points of the fifth cabinet.
Insert a Rigging Pin on both sides.
Fig. 20 - lower array
Raise the array clear of the Transport Dolly, allowing access to the rear of the array. The cabinet angles will open as far as
the pins will allow to the angle that has been pre-selected. Insert Rigging Pins at the LOCK position on the remaining
cabinets.
Fig. 22 - lift array
WPC User Guide v1.0
Fig. 21 - attach second block
Fig. 23 - insert lock pins
Page 42