Table of Contents
Advertisement
WPC System
USER GUIDE
The Sensor in Position
The Sensor is now ready for use. It is entirely passive so needs no power supply or batteries (the read-out display requires two
PP3 batteries). It can be connected to the read-out sensor with a standard 3-pin XLR mic cable of any length.
Martin Audio supply a cable designed specifically for use with the inclinometer system. Part Number PWA00057. This is a 35m
cable using high grade AES spec microphone cable fitted with male and female Neutrik NC3XX-HD connectors which are extra
rugged and have an IP rating of IP67 to enable use outdoors in all weather conditions.
Note that a single ASM20019 read-out display can be used with any number of sensors, it is not necessary to have the same
number of displays as sensors, one display can be plugged into each inclinometer cable, one at a time to take a reading of the
angle before entering the figure into the DISPLAY project.
WPC User Guide v1.0
Page 32
Advertisement
Table of Contents
