Rigging - Martin Audio MLA Mini User Manual

MLA MINI
USER GUIDE

RIGGING

This section of the User Guide covers the mechanical aspects of assembling the various
components of the MLA Mini system into the configuration required.
The rigging details here are limited to those required to achieve the arrangements necessary
for correct operation of the system using the six factory presets. Please refer to the Advanced
Manual for full details of other rigging possibilities, including all MLA Mini system configurations
which use more than 4 Minis and one MSX sub.
The six presets cover four possible rigging arrangements for 4 MLA Mini cabinets and one
MSX sub; the components required for each are summarised in the table below. Note that the
component count applies to a single system; for stereo, the quantities should be doubled.
Component
Preset Configuration
1&2 Pole Mount
3 Pole Mount
4 Ground stack
5* Flown array
(Flying Frame)/
Floor sub
Flown array
(Universal Tilt
Bracket)/Floor
sub
6 Fully flown
*The configuration for Preset 5 can be flown either using the Flying Frame or the Universal Tilt Bracket inverted.
24
Universal
Pole Fixed Tilt
Tilt
Mount Bracket
Bracket
1 1
1 1 1
1
Ground Ground
Transition
Stack Stack Bar
Frame
Baseplate (long)
1
1
1 1
1
Flying
Flying
Pins
Frame
Required
21
21
1 25
1 17
17
1 24
MLA Mini User Guide V1.0