WPC System
USER GUIDE
Insert a Rigging Pin at the LOCK position.
Lift the array clear of the Transport Dolly to a convenient working height. As the array goes up the cabinets will open up
to the angles that you have preselected from the DISPLAY 2.3 project prediction. Insert a further Rigging Pin at the LOCK
position on each cabinet to lock the inter-cabinet angles. At this stage the cable loom should be attached to the grid and the
first four cabinets connected. As more cabinets are added they should be connected to the loom and link cables between
cabinets connected where required. Cables are not shown for clarity.
WPC User Guide v1.0
Page 39