Table of Contents
Advertisement
WPC System
USER GUIDE
WPCGRIDt Touring Flying Frame
The Touring Flying Frame is a comprehensively featured Flying Frame designed to meet BGVC1 and DIN18800 standards,
and capable of lifting up to a maximum of 16 WPC cabinets using either one or two lift points, allowing both positive (up-tilt) and
negative (down-tilt) array tilt angles.
An inclinometer is available for use with the Touring Flying Frame which checks the angle at which the WPC array is flown at
(relative to the horizontal). It consists of a sensor part number ASM20017 (mounted within the Flying Frame, one required per
grid) and a remote display unit part number ASM20019. Interconnection is via a standard XLR mic cable.
WPC User Guide v1.0
Page 26
Advertisement
Table of Contents
