Martin Audio WAVEFRONT PRECISION WPC User Manual page 14

WPC System
USER GUIDE
In the splay tab you can refine the quantity and position of the array before the system optimises the inter-cabinet splay angles
and the "aim" angle for the flying grid.
Once this is complete you can further refine how the array is to be deployed in the Rig tab; choosing for example between a 2
point hang and a single point for which the application will display the best position on the flying frame to give the nearest angle
to the optimised aim. The actual physical angle that the specified hole in the frame will give will be displayed with the option to
use this angle in the optimisation so that the array EQ is optimised for the actual physical position in which the array is installed.
Finally the load on each flying point is shown and critically the Rig tab shows if the array is safe and meets both BGVC1 and
DIN18800 standards.
WPC User Guide v1.0
Page 14