The Telnet Screen; The Ftp Screen; Figure 50 Remote Management: Telnet; Table 29 Remote Management: Telnet - ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 User Manual

Chapter 11 Remote Management

11.4 The Telnet Screen

Use this screen to configure your ZyXEL Device for remote Telnet access. You can use Telnet
to access the ZyXEL Device's Command Line Interface (CLI).
Click REMOTE MGNT > TELNET. The following screen displays.

Figure 50 Remote Management: Telnet

The following table describes the labels in this screen.

Table 29 Remote Management: Telnet

LABEL
TELNET
Server Port
Server
Access
Secured
Client IP
Address
Secured
Client MAC
Address
Apply
Reset

11.5 The FTP Screen

Use this screen to upload and download the ZyXEL Device's firmware using FTP. To use this
feature, your computer must have an FTP client.
To change your ZyXEL Device's FTP settings, click REMOTE MGMT > FTP. The
following screen displays.
104
You can change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyXEL Device
using Telnet.
A secured client is a "trusted" computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the MAC address that you specify
to access the ZyXEL Device using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
ZyXEL NWA-1100 User's Guide