Introducing The Web Configurator; Accessing The Web Configurator; Figure 9 Change Password Screen - ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 User Manual

C
H A P T E R
This chapter describes how to access the ZyXEL Device's web configurator and provides an
overview of its screens.

2.1 Accessing the Web Configurator

1 Make sure your hardware is properly connected and prepare your computer or computer
network to connect to the ZyXEL Device (refer to the Quick Start Guide).
2 Launch your web browser.
3 Type "192.168.1.2" as the URL (default).
4 Type "1234" (default) as the password and click Login. In some versions, the default
password appears automatically - if this is the case, click Login.
5 You should see a screen asking you to change your password (highly recommended) as
shown next. Type a new password (and retype it to confirm) then click Apply.
Alternatively, click Ignore.
If you do not change the password, the following screen appears every time
you login.

Figure 9 Change Password Screen

You should now see the Status screen. See
screen.
ZyXEL NWA-1100 User's Guide
Introducing the Web
Configurator
Chapter 2 on page 35
2
for details about the Status
35