General Screen; Figure 23 System: General; Table 5 System: General - ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 User Manual

The subnet mask specifies the network number portion of an IP address. Your device will
compute the subnet mask automatically based on the IP address that you entered. You don't
need to change the subnet mask computed by the device unless you are instructed to do
otherwise.

5.4 General Screen

Use the General screen to identify your ZyXEL Device over the network. Click System >
General. The following screen displays.

Figure 23 System: General

The following table describes the labels in this screen.

Table 5 System: General

LABEL
Device Settings
Device Name
Administrator
Inactivity Timer
System DNS Servers
First DNS Server
Second DNS Server
Third DNS Server
ZyXEL NWA-1100 User's Guide
DESCRIPTION
Type a descriptive name to identify the ZyXEL Device in the Ethernet network.
This name can be up to 15 alphanumeric characters long. Spaces are not
allowed, but dashes "-" are accepted.
Type how many minutes a management session (via web configurator) can be
left idle before the session times out.
The default is 5 minutes. After it times out you have to log in with your
password again. Very long idle timeouts may have security risks.
A value of "0" means a management session never times out, no matter how
long it has been left idle (not recommended).
The field to the right displays the (read-only) DNS server IP address that the
DHCP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the
DNS server's IP address in the field to the right.
Select None if you do not want to configure DNS servers. If you do not
configure a DNS server, you must know the IP address of a machine in order
to access it.
The default setting is None.
Chapter 5 System Screens
55