Chapter 7 Wireless Security Screen
Table 22 Security: WPA2 or WPA2-MIX for Access Point
LABEL
Apply
Reset
7.4.5.2 Wireless Client
Use this screen to employ WPA2 or WPA2-MIX as the security mode of your ZyXEL Device
that is in Wireless Client operating mode. Select WPA2 or WPA2-MIX in the Security
Mode field to display the following screen.
Figure 40 Security: WPA2 or WPA2-MIX for Wireless Client
The following table describes the labels in this screen.
Table 23 Security: WPA2 or WPA2-MIX for Wireless Client
LABEL
Security Mode
IEEE802.1x
Authentication
EAP Type
User Information
Username
Password
Apply
Reset
86
DESCRIPTIONS
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Choose the same security mode used by the AP.
The options on the left refer to EAP methods. You can choose either TLS, LEAP,
PEAP or TTLS. The default value is PEAP.
The options on the right refer to authentication protocols. You can choose
between MSCHAPv2 and GTC.The default value is MSCHAPv2.
Supply the username of the account created in the RADIUS server.
Supply the password of the account created in the RADIUS server.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
ZyXEL NWA-1100 User's Guide