Figure 28 Wireless: Wireless Client; Table 10 Wireless: Wireless Client - ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 User Manual

Chapter 6 Wireless Settings Screen

Figure 28 Wireless: Wireless Client

The following table describes the general wireless LAN labels in this screen.

Table 10 Wireless: Wireless Client

LABEL
Basic Settings
Operation Mode Select Wireless Client from the drop-down list. Click Apply to make the Site
SSID
66
DESCRIPTION
Survey button appear next to the SSID field. Click this button to get a pop up
window of available APs.
The SSID (Service Set IDentifier) identifies the Service Set with which a wireless
station is associated. Wireless stations associating to the access point (AP) must
have the same SSID.
In this field, enter the SSID of the AP you want to use (click Site Survey button for a
list of available APs). Click Apply. Set the security configuration for this operating
mode in the Wireless > Security screen. Check the Status screen to check if the
settings you set show in the WLAN information.
Note: If you are configuring the ZyXEL Device from a computer
connected to the wireless LAN and you change the
ZyXEL Device's SSID or security settings, you will lose
your wireless connection when you press Apply to
confirm. You must then change the wireless settings of
your computer to match the ZyXEL Device's new
settings.
ZyXEL NWA-1100 User's Guide