The following table describes the labels in this screen.
Table 42 Channel Usage
LABEL
SSID
BSSID
Channel
Wireless Mode
Security
Restart
14.6 F/W Upload Screen
Use this screen to upload a firmware to your ZyXEL Device. Click Maintenance > F/W
Upload. Follow the instructions in this section to upload firmware to your ZyXEL Device.
Figure 63 Firmware Upload
The following table describes the labels in this screen.
Table 43 Firmware Upload
LABEL
File Path
Browse...
Upload
ZyXEL NWA-1100 User's Guide
DESCRIPTION
This is the Service Set IDentification name of the AP in an Infrastructure
wireless network or wireless station in an Ad-Hoc wireless network. For our
purposes, we define an Infrastructure network as a wireless network that uses
an AP and an Ad-Hoc network (also known as Independent Basic Service Set
(IBSS)) as one that doesn't. See the chapter on wireless configuration for more
information on basic service sets (BSS) and extended service sets (ESS).
This field displays the MAC address of the AP in an Infrastructure wireless
network. It is randomly generated (so ignore it) in an Ad-Hoc wireless network.
This is the index number of the channel currently used by the associated AP in
an Infrastructure wireless network or wireless station in an Ad-Hoc wireless
network.
This is the IEEE 802.1x standard used by your ZyXEL Device to apply
enhanced security methods for both the authentication of wireless stations and
encryption key management.
This is the wireless security method used by your ZyXEL Device protect
wireless communication between wireless stations, access points and the
wired network.
Click Restart to reload the screen.
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse ...
to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two
minutes.
Chapter 14 Maintenance
123