13.5 Log Settings Screen
Use this screen to configure to where and when the ZyXEL Device is to send the logs and
which logs and/or immediate alerts it is to send.
To change your ZyXEL Device's log settings, click LOGS > Log Settings. The screen
appears as shown.
Figure 60 Log Settings
The following table describes the labels in this screen.
Table 37 Log Settings
LABEL
Address Info
Mail Server
Mail Subject
Send Log to
SMTP Authentication
ZyXEL NWA-1100 User's Guide
DESCRIPTION
Enter the server name or the IP address of the mail server for the e-mail
addresses specified below. If this field is left blank, logs and alert messages
will not be sent via e-mail.
Type a title that you want to be in the subject line of the log e-mail message
that the ZyXEL Device sends.
Logs are sent to the e-mail address specified in this field. If this field is left
blank, logs will not be sent via e-mail.
If you use SMTP authentication, the mail receiver should be the owner of the
SMTP account.
Chapter 13 Log Screens
117