Telnet; Ftp; Figure 17-1 Telnet Configuration On A Tcp/Ip Network - ZyXEL Communications 650 Series User Manual

Prestige 650 Series User's Guide
17.1.2 Remote Management and NAT
When NAT is enabled:
Use the Prestige's WAN IP address when configuring from the WAN.
Use the Prestige's LAN IP address when configuring from the LAN.
17.1.3 System Timeout
There is a system timeout of five minutes (three hundred seconds) for either the console port or
telnet/web/FTP connections. Your Prestige automatically logs you out if you do nothing in this timeout
period, except when it is continuously updating the status in menu 24.1 or when sys stdio has been
changed on the command line.

17.2 Telnet

You can configure your Prestige for remote Telnet access as shown next.

17.3 FTP

You can upload and download Prestige firmware and configuration files using FTP. To use this feature, your
computer must have an FTP client.
17-2

Figure 17-1 Telnet Configuration on a TCP/IP Network

Remote Management Configuration