Figure 30-3 Menu 15 Nat Setup; Figure 30-4 Menu 15.1 Address Mapping Sets - ZyXEL Communications 650 Series User Manual

Prestige 650 Series User's Guide
The server set is a list of LAN servers mapped to external ports. To use this set, a server rule must be set up
inside the NAT address mapping set. Please see the section on port forwarding in the chapter on NAT web
configurator screens for further information on these menus. To configure NAT, enter 15 from the main
menu to bring up the following screen.
30.3.1 Address Mapping Sets
Enter 1 to bring up Menu 15.1 — Address Mapping Sets.
Enter Menu Selection Number:
SUA Address Mapping Set
Enter 255 to display the next screen (see also section 30.1.1). The fields in this menu cannot be changed.
30-4
Menu 15 — NAT Setup
1. Address Mapping Sets
2. NAT Server Sets
Enter Menu Selection Number:

Figure 30-3 Menu 15 NAT Setup

Menu 15.1 - Address Mapping Sets
1. ACL Default Set
2.
3.
4.
5.
6.
7.
8.
255. SUA (read only)
Enter Menu Selection Number:

Figure 30-4 Menu 15.1 Address Mapping Sets

NAT