Chapter 11 Firewall Configuration; Remote Management And The Firewall; Enabling The Firewall; Figure 11-1 Enabling The Firewall - ZyXEL Communications 650 Series User Manual

This chapter shows you how to enable and configure the Prestige firewall. This chapter applies to

11.1 Remote Management and the Firewall

When remote management is configured to allow management (see the Remote Management chapter) and the
firewall is enabled:
•
The firewall blocks remote management from the WAN unless you configure a firewall rule to
allow it.
•
The firewall allows remote management from the LAN.

11.2 Enabling the Firewall

Click Advanced Setup, Firewall, and then Config to display the following screen. Select the Firewall
Enabled check box and click Apply to enable (or activate) the firewall.
Firewall Configuration
Firewall Configuration

Figure 11-1 Enabling the Firewall

Prestige 650 series User's Guide
the Prestige 650H/HW and Prestige 650H-E.
Chapter 11
11-1