Figure 39-3 Menu 25.1.1 Ip Routing Policy; Table 39-2 Menu 25.1.1 Ip Routing Policy - ZyXEL Communications 650 Series User Manual

Prestige 650 Series User's Guide
Type a number from 1 to 6 to display Menu 25.1.1 – IP Routing Policy (see the next figure). This menu
allows you to configure a policy rule.
Policy Set Name= test
Active= Yes
Criteria:
Action= Matched
Press Space Bar to Toggle.
The following table describes the fields in this menu.
FIELD
Policy Set Name
Active
Criteria :
IP Protocol
Type of Service
Precedence
Packet Length
39-4
IP Protocol = 6
Type of Service= Normal
Precedence = 0
Source:
addr start= 1.1.1.1
port start= 20
Destination:
addr start= 2.2.2.2
port start= 20
Gateway addr = 192.168.1.1
Type of Service= Max Thruput
Precedence = 0
Press ENTER to Confirm or ESC to Cancel:

Figure 39-3 Menu 25.1.1 IP Routing Policy

Table 39-2 Menu 25.1.1 IP Routing Policy

This is the policy set name assigned in Menu 25 – IP Routing Policy Setup.
Press [SPACE BAR] and then [ENTER] to select Yes to activate or No to
deactivate the policy. Inactive policies are displayed with a minus sign "-" in
SMT menu 25.
IP layer 4 protocol, for example, UDP, TCP, ICMP, etc.
Prioritize incoming network traffic by choosing from Don't Care, Normal, Min
Delay, Max Thruput, Min Cost or Max Reliable.
Precedence value of the incoming packet. Press [SPACE BAR] and then
[ENTER] to select a value from 0 to 7 or Don't Care.
Type the length of incoming packets (in bytes). The operators in the Len
Comp (next field) apply to packets of this length.
Menu 25.1.1 - IP Routing Policy
Packet length= 40
Len Comp= N/A
end= 1.1.1.1
end= 20
end= 2.2.2.2
end= 20
Log= No
DESCRIPTION
IP Policy Routing