Prestige 310 Broadband Internet Access Router
Chapter 8
Telnet Configuration and Capabilities
This chapter covers the Telnet Configuration and Capabilities of the Prestige.
8.1
About Telnet Configuration
Before the Prestige is properly setup for TCP/IP, the only option for configuring it is through the
console port. Once your Prestige is configured, you can use telnet to configure it remotely as
LAN
I N T E R N E T
Hub
Prestige 310
Cable Modem
Modem
ISP
shown below.
Figure 8-1 Telnet Configuration on a TCP/IP Network
When IP routing is disabled, the Prestige can still function as a host.
Telnet Configuration and Capabilities
8-1