Chapter 28 Static Route Setup; Ip Static Route Overview; Figure 28-1 Sample Static Routing Topology - ZyXEL Communications 650 Series User Manual

Prestige 650 Series User's Guide
Chapter 28
Static Route Setup
This chapter shows how to setup IP static routes.

28.1 IP Static Route Overview

Static routes tell the Prestige routing information that it cannot learn automatically through other means.
This can arise in cases where RIP is disabled on the LAN or a remote network is beyond the one that is
directly connected to a remote node.
Each remote node specifies only the network to which the gateway is directly connected and the Prestige
has no knowledge of the networks beyond. For instance, the Prestige knows about network N2 in the
following figure through remote node Router 1. However, the Prestige is unable to route a packet to
network N3 because it does not know that there is a route through remote node Router 1 (via Router 2). The
static routes allow you to tell the Prestige about the networks beyond the remote nodes.

Figure 28-1 Sample Static Routing Topology

Static Route Setup 28-1