Viewing Firewall Log; Figure 32-1 Menu 21.2 Firewall Setup; Figure 32-2 Firewall Log Example - ZyXEL Communications 650 Series User Manual

Prestige 650 Series User's Guide
The firewall protects against Denial of Service (DOS) attacks when
it is active. The default Policy sets
1. allow all sessions originating from the LAN to the WAN and
2. deny all sessions originating from the WAN to the LAN
You may define additional Policy rules or modify existing ones but
please exercise extreme caution in doing so
Active: Yes
LAN-to-WAN Set Name: ACL Default Set
WAN-to-LAN Set Name: ACL Default Set
Please configure the Firewall function through Web Configurator.
Use the web configurator or the command interpreter to configure the firewall

32.4 Viewing Firewall Log

In menu 21, enter 3 to view the firewall log. An example of firewall log is shown next.
# Time
120|Jan 01 00 |From:192.168.17.1
| 12:38:44 |UDP src port:00520
121|Jan 01 00 |From:192.168.1.1
| 07:39:25 |ICMP
Clear Firewall Log (y/n):
The following table describes the fields in this menu.
32-2
Menu 21.2 - Firewall Setup
Press ENTER to Confirm or ESC to Cancel:

Figure 32-1 Menu 21.2 Firewall Setup

Packet Information
type:00003

Figure 32-2 Firewall Log Example

rules.
Reason
To:192.168.17.255 |default policy
dest port:00520 |<2,00>
To:192.168.11.33 |default policy
code:00001 |<0,00>
Action
|block
|
|forward
|
Enabling the Firewall