Traffic Redirect; Figure 27-12 Menu 11.6 For Llc-Based Multiplexing Or Ppp Encapsulation; Figure 27-13 Traffic Redirect Setup Example - ZyXEL Communications 650 Series User Manual

Prestige 650 Series User's Guide
Menu 11.6 - Remote Node ATM Layer Options
VPI/VCI (LLC-Multiplexing or PPP-Encapsulation)
ENTER here to CONFIRM or ESC to CANCEL:
.

Figure 27-12 Menu 11.6 for LLC-based Multiplexing or PPP Encapsulation

In this case, only one set of VPI and VCI numbers need be specified for all protocols. The valid range for
the VPI is 0 to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local management of ATM
traffic).

27.7 Traffic Redirect

Traffic redirect forwards traffic to a backup gateway when the Prestige cannot connect to the Internet. An
example is shown in the figure below.
27-14
VPI #= 8
VCI #= 35
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0

Figure 27-13 Traffic Redirect Setup Example

Only one set of VPI
and VCI numbers
needs to be
specified.
Remote Node Configuration