Table of Contents
Advertisement
Operating the System
Operation with SmartKey Code Keypad Only
Viewing the system status
Enter your user number + user code.
The system status is displayed according to the following table. To abort the system status dis-
play press "C". The arming/disarming sequence will otherwise commence after 2 seconds.
Display element
Behavior
Green LED
Lit
Red LED
Lit
Operation with SmartKey Code Keypad Only
Notes on arming
If user number (ID) is 1-digit or 2-digit: arming will occur immediately after entering the user
code and pressing the "
If user number (ID) is 3-digit: arming will occur immediately after entering the last digit of the
user code.
Arming the system with a code
1. Enter your user number + user code.
The green LED starts to light up, signaling that the system is currently disarmed.
The
red LED starts to flash, signaling that the arming process has commenced.
Further keypad signals (LED) follow as described in the left-hand box (arming successful) or
in the right-hand box (arming unsuccessful).
The green LED is deactivated.
The red LED and the buzzer are acti-
vated for 2.5 seconds (continuous
signal).
Meaning
System disarmed
System is armed
" key or automatically 2 seconds after entering the last digit.
System arming unsuccessful. See the
table "Operating Problems During Normal
Operation" for assistance.
36
The red LED is deactivated.
The green LED lights up for 5 seconds.
The buzzer simultaneously emits an in-
terval signal for 5 seconds.
Advertisement
Table of Contents
