Axis Replacement Via Plc - Siemens SINUMERIK 840D sl Function Manual

Mode Groups, Channels, Axis Replacement (K5)
Axis/spindle replacement
6.4.8

Axis replacement via PLC

● The type of an axis can be determined at any time via an interface byte (PLC-axis,
TYPE display
Figure 6-3
* neutral axis/spindle also contains the Command-/Oscillation-axis
486
channel axis, neutral axis).
TYPE display axis replacement via PLC
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Extended Functions