Audio Notification Of A Beacon Or Message Received Aprs Ringer Function - Yaesu FTM-300DR Instruction Manual

Second digit
E = Mic-E:
Beacon of a mike encoder station
P = Position: Beacon of a fixed station (FIXED) / mobile station (MOVING)
P = Position: Beacon of a fixed station (fixed) / mobile station (moving) (compression
type)
W = Weather report: Beacon of a meteorological station
w = Weather report: Beacon of a meteorological station (compression type)
O = Object: Beacon of an object station
o = Object: Beacon of an object station (compression type)
I = Item: Beacon of an item station
i = Item:
Beacon of an item station (compression type)
K = Killed Object/Item: Deleted object station / item station
k = Killed Object/Item: Deleted object station / item station (compression type)
S = Status:
G = Raw NMEA: Beacon of a Raw NMEA
? = Other:
Audio notification of a beacon or message received
APRS RINGER function
An audio notification can be set to sound when an APRS beacon arrives from a partner
station.
1
Press and hold the [F(SETUP)] key → [APRS] → [7 APRS RINGER].
2
Rotate the DIAL knob to select the item to be set.
Please refer to the list of setup menu actions (page 41) for the details of each item.
TX BEACON:
TX MESSAGE:
RX BEACON:
RX MESSAGE:
MY PACKET:
CALL RINGER:
RANGE RINGER: 1km - 100km / OFF
MSG VOICE:
3
Press the DIAL knob to select "ON" or "OFF".
4
Repeat step 2 and 3 to set the remaining items.
5
Press the [DISP] key or press the PTT switch to return to the operating screen.
Beacon of a status station
Beacon that could not be interpreted
ON / OFF
ON / OFF
ON / OFF
ON / OFF
ON / OFF
ON / OFF
ON / OFF
21