Yaesu FTM-300DR Instruction Manual page 48

y 17 DIGI PATH 3
Setting the digipeater route addresses.
Setting item: ADDRESS 1
ADDRESS 2
Default: –––––– ––
Explanation: Enter specific address information (callsign and alias) when "PATH 3 is
selected in [APRS] → [14 DIGI PATH] in the setup menu.
A maximum of up to 2 addresses can be specified.
y 18 DIGI PATH 4
Setting the digipeater route addresses.
Setting item: ADDRESS 1
ADDRESS 2
Default: –––––– ––
Explanation: Enter specific address information (callsign and alias) when "PATH 4" is
selected in [APRS] → [14 DIGI PATH] in the setup menu.
A maximum of up to 2 addresses can be specified.
y 19 DIGI PATH FULL 1
Setting the digipeater route addresses.
Setting item: ADDRESS 1
ADDRESS 2
ADDRESS 3
ADDRESS 4
ADDRESS 5
ADDRESS 6
ADDRESS 7
ADDRESS 8
Default: –––––– ––
Explanation: Enter specific address information (callsign and alias) when "FULL 1" is
selected in [APRS] → [14 DIGI PATH] in the setup menu.
A maximum of up to 8 addresses can be specified.
47