Yaesu FTM-300DR Instruction Manual page 18

y Explanation of the detail screen display in a S (Status) APRS STATION LIST and
description of operations
Rotate the DIAL knob in the APRS STATION LIST screen to select the "S" (Status) station
and press the DIAL knob to display the S (Status) detailed screen.
Number:
Character:
Compass:
Callsign:
Partner station information:
Distance:
Date:
Time:
Latitude:
Longitude:
COMMENT TEXT: The comments information will be displayed.
•Operation
Scroll the screen
Select the beacon to display
Display the packet data (raw data)
Manual transmission of a beacon (page 23)
Delete a selected beacon station from the display (page 22)
Sets the frequency of the opposite band of the APRS operating band
according to the frequency information included in the beacon.
Setup menu (page 37)
① ② ③
COMMENT TEXT
[
The number of received beacon (up to a maximum of 100).
The station list characters will be displayed.
The direction of the partner station as seen from your own station will be displayed.
The received station callsign will be displayed.
Status information will be displayed.
Distance to the received station will be displayed.
The date the beacon was received (MM/DD) will be displayed.
The time the beacon was received (HH:MM) will be displayed.
The N (north latitude) or S (south latitude) of the current position will be displayed (DDMM.MM or
DDMMSS).
The E (east longitude) or W (west longitude) of the current position will be displayed (DDMM.MM or
DDMMSS).
④ ⑤ ⑥
STATUS 04/07
15114km 10:09
N 36 ̊ 43 . 17 �
E 139 ̊ 47 . 35 �
]
Rotate the DIAL knob.
Press the DIAL knob to display
then rotate the DIAL knob.
[F(SETUP)]→[RAW]
[F(SETUP)]→[BCN-TX]
[F(SETUP)]→[DEL]
[F(SETUP)]→[QSY]
Press and hold the [F(SETUP)] key.
17
⑦
⑧
⑨
⑩
⑪
,