Yaesu FTM-300DR Instruction Manual page 53

FAST RATE: BEACON transmission time interval when speed increases above the
[HIGH SPD] setting.
TURN ANGLE: Set the minimal value of changes in angle when the direction of movement
changes.
TURN SLOPE: Set the coefficient for automatically altering the angle that judges changes
in the direction of movement according to speed.
The higher the coefficient value setting, the greater the judgment angle is
when moving at slow speeds.
(If the real number for units of rotating tilt is set to 1/10, this is the same as
the unit setting used in HamHUD Nichetronix, LLC series transceivers.)
TURN TIME: Set the time limit until the next BEACON can be transmitted, after a
BEACON is transmitted upon detection of a change in time (Variable Rate
Beaconing) or direction (Corner Pegging).
Caution
If SmartBeaconing
TM
can be changed.
When changing parameters, be sure to adjust parameters of SmartBeaconing and DIGI PATH settings
for appropriate beacon transmission intervals to avoid communications channel congestion.
y 29 SORT FILTER
Sort function / filter function setting.
Setting Item: SORT:
FILTER: ALL / MOBILE / FREQUENCY / OBJECT/ITEM / DIGIPEATER /
Default: SORT:
FILTER: ALL
Explanation:
This sets the sorting condition for the display order of the station list and selects the type
of beacon to be displayed in the station list.
SORT: Select the sort condition for the display order of the station list.
TIME:
CALLSIGN:
DISTANCE:
FILTER: Select the type of beacon to be displayed in the station list.
ALL:
MOBILE:
FREQUENCY:
OBJECT/ITEM:
DIGIPEATER:
VoIP:
1 to 255 (X10)°/SPEED
is to be operated at different timings, the parameters of settings TYPE1 to TYPE3
TIME / CALLSIGN / DISTANCE
VoIP / WEATHER / YAESU / OTHER PACKET / CALL RINGER /
RANGE RINGER / 1200bps / 9600bps
TIME
Sort the station list starting from the latest one received.
Sort the station list in ascending order of the callsign.
Sort the station list starting from the one closest to your own
station.
All the received beacons will be displayed.
Only the mobile stations will be displayed.
Only station with frequency information will be displayed.
Only object stations and item stations will be displayed.
Only digipeater stations will be displayed.
Only VOIP station such as WIRES will be displayed.
52