Yaesu FTM-300DR Instruction Manual page 50

y 22 MESSAGE GROUP
Group filter setting for APRS MSG GROUP received messages.
Setting Items: A filter can be set for receiving messages with a specified group code
(ALL or CQ).
GROUP 1
GROUP 2
GROUP 3
GROUP 4
GROUP 5
GROUP 6
BULLETIN 1
BULLETIN 2
BULLETIN 3
Default: GROUP 1: ALL
GROUP 2: CQ
GROUP 3: QST
GROUP 4: YAESU
GROUP 5: ––– –––– ––
GROUP 6: ––– –––– ––
BULLETIN 1: BLN
BULLETIN 2: BLN
BULLETIN 3: BLN
Explanation: A filter can be set to receive messages with a specified group code (ALL
or CQ)
(ALL, CQ, QST, and YAESU are selected in default settings).
"": Acts as a wild card matching any character received.
y 23 MESSAGE REPLY
Setting Item: REPLY
CALLSIGN
REPLAY TEXT
Default: REPLY :
CALLSIGN:
REPLAY TEXT: –
Explanation:
A reply message set up beforehand can be automatically sent out upon receiving a
message. Enter "CALLSIGN" to automatically reply to a specific station.
REPLY : OFF: A reply message is returned automatically when a message is
ON:
CALLSIGN: Set only when replying only to a station with a specific APRS callsign.
REPLAY TEXT: Enter the automatic reply message.
OFF
–
received.
A reply message is not returned when a message is received.
49