Setting The Bell Ring When A Message Or Beacon Is Transmitted/Received - Yaesu FTM-400DR Instruction Manual

Using the APRS Set-up Menu
4
Touch [1 BEACON] to select the display color of the
pop-up.
The display color of the pop-up changes in the
following order each time the key is touched.
"CHECK OFF", "GREEN", "BLUE", "ORANGE",
"PURPLE", "SKY-BLUE", "YELLOW", "AMBER",
"WHITE"
5
Similarly, touch Item 2 to 8 to select the display color of the pop-up
6
Press for one second or longer
The display color of the pop-up will be set and the display will return to the previous
screen.
Tip Factory default value: All items are set to "CHECK OFF"

Setting the bell ring when a message or beacon is transmitted/received

This sets the bell ring and the conditions for the bell ring when an APRS beacon is
received/sent.
1
Press for one second or longer
The set-up menu will be displayed.
2
Select and touch [APRS]
3
Select and touch [9 APRS RINGER]
The screen for setting the bell ring will be displayed.
When the item is not displayed, turn
display.
• TX BEACON: This sets the bell ring when your own
• TX MESSAGE: This sets the bell ring when your own station is sending a
• RX BEACON: This sets the bell ring when a beacon is received from another
• RX MESSAGE: This sets the bell ring when a message is received from another
• MY PACKET: This sets the bell ring when your own station transmit beacon
• CALL RINGER: A bell will ring when a beacon from a station whose call sign is set
• RNG RINGER: A special bell will ring when a beacon located close to your own
station is sending a beacon. When
set to ON, a bell will ring prior to the transmission.
message. When set to ON, a bell will ring prior to the transmission.
station. When set to ON, a bell will ring when a beacon is received.
station. When set to ON, a bell will ring when a message is
received.
(relayed signal) is received.
using [APRS]
is received.
station is received. When distance is selected, a special bell
to scroll the
[10 APRS RINGER (CALL)] in the set-up menu
74