Yaesu FTM-300DR Instruction Manual page 42

y 4 APRS MODEM
APRS modem ON/OFF setting.
Setting Item: OFF / ON
Default: OFF
Explanation:
OFF: Turn APRS function [OFF].
ON: Turn APRS function [ON].
y 5 APRS MUTE
AF mute ON / OFF setting for APRS reception band when APRS function is on.
Setting Item: ON / OFF
Default: OFF
Explanation: When the APRS function is on, all received sounds in the band set as the
APRS receive band is muted.
y 6 APRS POPUP
APRS reception pop-up setting
Setting item: BEACON:
MESSAGE: OFF / 3 sec / 5 sec / 10 sec / HOLD
MY PACKET: OFF / ON
Default: BEACON:
MESSAGE:
MY PACKET: OFF
Explanation:
When an APRS BEACON is received, the content is shown in a POPUP.
BEACON: Setting for the time a POPUP is displayed when a beacon is received.
MESSAGE: Setting for the time a POPUP is displayed when a new message is received.
MY PACKET: Setting for the time a POPUP is displayed when a self transmitted beacon (relay
wave) is received.
y 7 APRS RINGER
Setting the bell sound when a message or beacon is transmitted/received.
Setting item: TX BEACON:
TX MESSAGE:
RX BEACON:
RX MESSAGE:
MY PACKET:
CALL RINGER:
RANGE RINGER: 1km - 100km / OFF
MSG VOICE:
Default: TX BEACON:
TX MESSAGE:
RX BEACON:
RX MESSAGE:
MY PACKET:
OFF / 3 sec / 5 sec / 10 sec / HOLD
10 sec
10 sec
ON / OFF
ON / OFF
ON / OFF
ON / OFF
ON / OFF
ON / OFF
ON / OFF
ON
ON
ON
ON
ON
41