Tightening Torques And Adjustments Summary - Stiga TC 108 SD Workshop Manual

WORKSHOP MANUAL
TC 108 SD - TC 118 SD
General informations
­­­
Related topics
[ 4.1] Adjusting the engagement and checking
the blade brake
[ 4.2] Brake adjustment
[ 4.3] Drive belt adjustment
Map of functional units
TIGHTENING TORQUES AND ADJUSTMENTS
SUMMARY
A) Tightening torques
Below are the specified tightening torques for the fix ing
bolts on the main parts.
1 Screws for engine fastening ................. 25 ÷ 30 Nm
2 Screw for engine pulley ........................ 45 ÷ 50 Nm
3 Screws for rear axle fastening .............. 25 ÷ 30 Nm
4 Blade pulley screws ............................. 25 ÷ 30 Nm
5 Flanged support fixing nuts .................. 25 ÷ 30 Nm
6 Screw for blade .................................... 45 ÷ 50 Nm
Every section in this manual gives values for all the com-
ponents involved in each operation.
B) Adjustments
Operation
a) Brake adjustment
b) Drive belt adjustment
c) Blades engagement adjustment
CHAPTER REVISION
8.1 0
1
2
Position Position of controls
FROM ... PAGE
2018 1 of 1
4
6 5 3
Adjustment
45 - 47
109 - 111
Mod. 108 A = 113-115
Mod. 118 A = 82 - 84
A