Using The Audio Output Being Played Back - Yamaha YSP-4000 Owner's Manual

5
Press TEST when you have completed all
your adjustments.
Adjusting the audio balance
1
Set the operation mode selector to YSP.
TEST
~
• All channel levels cannot be adjusted when the 2-channel or
5-channel stereo playback (see page 62), My Beam
(see page 63), or My Surround (see page 57) is selected as the
beam mode.
• "FRONT UR" cannot be adjusted when Stereo plus 3 Beam is
selected as the beam mode (see page 57).
• "FRONT UR" are automatically adjusted depending on the
settings of the other channels when Stereo plus 3 Beam or
stereo playback is selected as the beam mode (see pages 57 and
62).
,0,
:<i>~
If the level of a particular channel cannot be adjusted, "- -dB"
appears in the front panel display.
You can also manuaIly adjust the channel levels while
playing back an input source such as a DVD.
(U.S.A. and Canada models)
2
Press CH LEVEL repeatedly (or press
CH LEVEL and
.6.
I
"V) to select the channel
you want to adjust.
The front panel display changes as foIlows.
CH LEVEL
~
or
CH LEVEL
~
+
FF'ONT L
+
1• OdB
t
CENTER -2 . .5dB
t
FRONT F'
+1. OdB
t
SUR. R +2.0dB
t
SUF'. L
+2.
OdB
t
SMFR --dB
"SWFR" is available only when a subwoofer is connected to
this unit and SWFR is selected for BASS OUT in SOUND
MENU (see page 82).
91
En
•