Yamaha YSP-4000 Owner's Manual page 19

@ DVD playerNCR control buttons
Control your DVD player or VCR (see pages 105 and
106).
@ My Beam microphone
Collects the test tones from this unit when using the My
Beam auto-adjust function (see page 63).
@
TV POWER
Turns on the power of your TV or sets it to the standby
mode (see page 104).
@ AVPOWER
Turns on the power of the selected component or sets it to
the standby mode (see pages 105 and 106).
®
INPUT1
Switches the input source on your TV (see page 104).
@
MACRO
Use to set the TV macro (see page 107).
® /.
Switches the preset station number (1 to 8) when this unit
is receiving an FM broadcast or XM channel (see
page 54).
@ CAT
Switches the preset station group (A to E) when this unit is
receiving an FM broadcast or XM channel (see page 54).
®
SLEEP
Sets the sleep timer (see page 72).
@ INPUTMODE
Toggles between input modes (AUTO, DTS, and
ANALOG) (see page 93).
®l
Beam mode buttons
Change the beam mode settings (see pages 56, 62, and
63).
®
SUR. DECODE
Selects the surround mode for playback (see page 59).
@
MENU
Displays the setup menu on your TV monitor (see
pages 39 and 77).
@ Operation mode selector
Selects the operation mode of this unit. Select YSP when
operating this unit and select TV/AV when operating your
TV or other AV components.
Controls and functions
@
RETURN
Selects sleep timer settings or returns to the previous SET
MENU screen.
®
TV VOL
+/-
Adjusts the volume level of your TV (see page 104).
@ CH +/-
Changes the channels of your TV, digital satellite tuner,
cable TV tuner, or VCR (see pages 104 and 106).
@ TV MUTE, CODE SET
Mutes the audio output of your TV (see page 104).
Sets up remote control codes (see page 103).
The functions
@
and
®
are available only when the FM/XM
stations are preset.
15
En
•