Sign in today to find solutions:

Don't have an account? Sign up

 
UA
YSP-4000
Digital Sound Projector
TM
OWNER'S MANUAL
Next page ->

Summary of Contents

  • Page 1

    YSP-4000 Digital Sound Projector OWNER’S MANUAL...

  • Page 2

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated...

  • Page 3

    – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

  • Page 4

    Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

  • Page 5: Table Of Contents

    INTRODUCTION Overview ... 2 Features ... 3 Using this manual ... 5 Supplied accessories ... 6 Controls and functions ... 7 Front panel ... 7 Front panel display ... 8 Rear panel ... 9 Remote control (Europe, Australia, Asia, and Korea models) ... 11 Remote control (U.S.A.

  • Page 6: Overview

    The YSP-4000 projects sound beams containing surround sound information for the front right (R), front left (L), surround right (SR), and surround left (SL) speaker positions, which are reflected off the walls of your listening room before reaching the actual listening position.

  • Page 7: Features

    XM Satellite Radio information displaying capability iPod™ Controlling Capability (U.S.A., Canada, and Australia models only) DOCK terminal to connect a Yamaha iPod universal dock (such as the YDS-10, sold separately), which supports iPod (Click and Wheel), iPod nano, and iPod mini...

  • Page 8

    ” logo and “IntelliBeam” are trademarks of YAMAHA CORPORATION. The “ ” logo and “Cinema DSP” are registered trademarks of YAMAHA CORPORATION. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

  • Page 9: Using This Manual

    Notes • This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the supplied owner’s manual for each component. • Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified. •...

  • Page 10: Supplied Accessories

    Supplied accessories Check that you have received all of the following parts. Remote control ( 1) STANDBY/ON POWER POWER DOCK AUX1 AUX2 AUX3 INPUT1 MACRO PRESET/TUNE SEARCH MEMORY FM/XM AUTO VOL MODE SETUP INPUTMODE SLEEP 5BEAM ST+3BEAM 3BEAM STEREO MY BEAM MY SUR.

  • Page 11: Controls And Functions, Front Panel

    Front panel AUX 3 AUX 3 INTELLIBEAM MIC 1 Remote control sensor Receives infrared signals from the remote control. 2 Front panel display Shows information about the operational status of this unit. 3 AUX 3 input jack Connect your portable audio player (see page 27). 4 INTELLIBEAM MIC jack Connect the supplied IntelliBeam microphone for AUTO SETUP (see page 38).

  • Page 12: Front Panel Display

    Controls and functions Front panel display 1 HDMI indicator Lights up when the signal of the selected input source is input at the HDMI IN jack(s). 2 TUNER indicators FM: Light up when this unit is receiving an FM broadcast. XM: MEMORY flashes during the XM preset operation (U.S.A.

  • Page 13: Rear Panel

    (see page 24). 0 DOCK terminal (U.S.A., Canada, and Australia models only) Connect the Yamaha iPod universal dock (such as YDS- 10, sold separately) (see page 2 in the Reference Guide). A DVD COAXIAL DIGITAL IN jack Connect your DVD player via a coaxial digital connection (see page 24).

  • Page 14

    (see page 30). F SYSTEM CONNECTOR terminal (U.S.A. and Canada models only) Use to connect a Yamaha subwoofer equipped with a SYSTEM CONNECTOR terminal to this unit. G VIDEO OUT jack Connect to the video input jack of your TV via a composite analog video connection to display the OSD of this unit (see page 23).

  • Page 15

    Remote control (Europe, Australia, Asia, and Korea models) This section describes the functions of the remote control used to control this unit. Some buttons marked with an asterisk (*) share the common functions between the YSP and TV/AV operation modes (S). You can also control other components using the remote control once you set the appropriate remote control codes.

  • Page 16

    Controls and functions F DVD player/VCR control buttons Control your DVD player or VCR (see pages 105 and 106). G My Beam microphone Collects the test tones from this unit when using the My Beam auto-adjust function (see page 63). H TV POWER Turns on the power of your TV or sets it to the standby mode (see page 104).

  • Page 17

    This section describes the functions of the remote control used to control FM, Radio Data System, or iPod when the TV/AV mode is selected with the operation mode selector (7). Note that the Radio Data System controls are available for Europe model only, and the iPod controls are available for Australia model only.

  • Page 18: Remote Control (u.s.a. And Canada Models)

    Controls and functions Remote control (U.S.A. and Canada models) This section describes the functions of the remote control used to control this unit. Some buttons marked with an asterisk (*) share the common functions between the YSP and TV/AV operation modes (S). You can also control other components using the remote control once you set the appropriate remote control codes.

  • Page 19

    F DVD player/VCR control buttons Control your DVD player or VCR (see pages 105 and 106). G My Beam microphone Collects the test tones from this unit when using the My Beam auto-adjust function (see page 63). H TV POWER Turns on the power of your TV or sets it to the standby mode (see page 104).

  • Page 20

    Controls and functions This section describes the functions of the remote control used to control FM, XM Satellite Radio, or iPod when the TV/AV mode is selected with the operation mode selector (7). STANDBY/ON POWER POWER DOCK AUX1 AUX2 AUX3 INPUT1 MACRO PRESET/TUNE...

  • Page 21: Installation, Before Installing This Unit, Installing This Unit

    This section describes a suitable installation location to install this unit using a metal wall bracket, a rack or a stand. Depending on your installation environment, connections with external components can be done before installing this unit. We recommend that you temporarily place and arrange all components, including this unit, in order to decide which procedure should come first.

  • Page 22

    Installation Installation examples Example 1 Install this unit as close to the exact center of the wall as possible. Example 2 Install this unit so that the sound beams can be reflected off the walls. Example 3 Install this unit as close to the exact front of your normal listening position as possible.

  • Page 23

    You can use the optional metal wall bracket (such as SPM- K30) to mount this unit on the wall in your listening room. Metal wall bracket This unit YSP-4000 24- 7x22 SPM-K30 (Option) Refer to the instructions supplied with the metal bracket for details on how to attach the metal bracket to the wall or how to attach this unit to the metal bracket.

  • Page 24: Connections

    Connections This unit is equipped with the following types of audio/video input/output jacks/terminal: For audio input • 2 optical digital input jacks • 2 coaxial digital input jacks • 2 sets of analog input jacks • 1 universal dock terminal (U.S.A., Canada, and Australia models only) For audio/video input •...

  • Page 25: Before Connecting Components

    Before connecting components Cables used for connections Audio/Video HDMI cable Audio Audio pin cable (supplied) (White) (Red) Optical cable (supplied) Digital audio pin cable (supplied) (Orange) 3.5 mm stereo mini plug cable Subwoofer pin cable Video OSD video pin cable (supplied) / Video pin cable (Yellow) Component video pin cable (Green)

  • Page 26: Connections Using Hdmi Cables

    Connections Connections using HDMI cables This unit is equipped with 2 HDMI input jacks and 1 HDMI output jack. If your TV and other components have HDMI jacks, use HDMI cables for simpler and easier connections, and you can skip the connection procedures from page 23 to 26.

  • Page 27: Connecting A Tv

    Connecting a TV For audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO IN jacks on this unit. If your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGITAL IN jack on this unit.

  • Page 28: Connecting A Dvd Player/recorder

    Connections Connecting a DVD player/recorder For audio connection, connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL IN jack on this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog audio output jacks on your DVD/VCR combo player/recorder to the AUX 1 AUDIO IN jacks on this unit in addition to the coaxial digital audio connection.

  • Page 29: Connecting A Digital Satellite Tuner Or A Cable Tv Tuner

    Connecting a digital satellite tuner or a cable TV tuner For audio connection, connect the optical digital output jack on your digital satellite tuner or cable TV tuner to the TV/ STB OPTICAL DIGITAL IN jack on this unit. Connect the analog audio output jacks on your digital satellite tuner or cable TV tuner to the TV/STB AUDIO IN jacks on this unit.

  • Page 30: Connecting A Digital Airwave Tuner

    Connections Connecting a digital airwave tuner For audio connection, connect the TV/STB AUDIO IN jacks on this unit to the analog audio output jacks on your TV. Connect the optical digital output jack on your digital airwave tuner to the TV/STB OPTICAL DIGITAL IN jack on this unit in addition to the analog audio connection.

  • Page 31: Connecting A Portable Audio Player

    Connecting a portable audio player Connect the analog audio output jack on your portable audio player to the AUX 3 input jack on the front panel of this unit. Audio 3.5 mm stereo mini plug cable Front panel of this unit AUX 3 INTELLIBEAM MIC INPUT...

  • Page 32: Connecting Other External Components

    Connections Connecting other external components If your component supports optical digital connections, connect the optical digital output jack on your component (e.g., DVD player/recorder) to the AUX 1 OPTICAL DIGITAL IN jack on this unit. If your component does not support optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL DIGITAL IN jack on this unit.

  • Page 33: Connecting A Subwoofer

    OUT in SUBWOOFER SET (see page 82). When connecting a Yamaha subwoofer equipped with a SYSTEM CONNECTOR terminal, connect it to the SYSTEM CONNECTOR terminal on this unit (U.S.A. and Canada models). If the subwoofer is connected using a system type connection, changing the power mode of this unit controls the power mode of the subwoofer.

  • Page 34: Connecting The Fm Antenna, About The Rs-232c/ir-out/ir In Terminals

    Connections Connecting the FM antenna Connect the supplied FM antenna to the FM ANTENNA jack on this unit. FM indoor antenna (supplied) COMPONENT About the RS-232C/IR-OUT/IR IN terminals The RS-232C, IR-OUT, and IR IN terminals do not support normal external component connections. They are control expansion terminals for commercial use only.

  • Page 35: Connecting The Ac Power Supply Cable

    Connecting the AC power supply cable Once all other connections are complete, plug one end of the AC power supply cable into the AC IN terminal of this unit and then plug the other end into the AC wall outlet. Rear panel of this unit (U.S.A.

  • Page 36: Getting Started, Installing Batteries In The Remote Control, Operation Range Of The Remote Control

    GETTING STARTED Installing batteries in the remote control Press Press and hold the mark on the battery cover and then open the cover. Insert the two supplied batteries (AA, R6, UM-3) into the battery compartment. Make sure you insert the batteries according to the polarity markings (+/–).

  • Page 37: Turning On This Unit Or Setting It To The Standby Mode

    Turning on this unit or setting it to the standby mode INPUT VOLUME STANDBY/ON STANDBY/ON POWER POWER DOCK AUX1 AUX2 AUX3 INPUT1 MACRO PRESET/TUNE SEARCH MEMORY FM/XM (U.S.A. and Canada models) Press STANDBY/ON to turn on the power of this unit. The volume level appears in the front panel display, and the current input source and beam mode are displayed.

  • Page 38: Using Set Menu, Displaying The Osd (on-screen Display)

    USING SET MENU Displaying the OSD (on-screen display) This section describes how to display the OSD (on-screen display) of this unit on your TV screen and to set the parameters for your listening room. Once this is complete, you can enjoy real surround sound while watching TV in the comfort of your own home.

  • Page 39: The Flow Chart Of Set Menu

    The flow chart of SET MENU The following diagram illustrates the overall flow of the setup procedure. Run LANGUAGE SETUP. See “Changing OSD language” on page 36. Run AUTO SETUP (IntelliBeam). See “AUTO SETUP (IntelliBeam)” on page 37. Look for a remedy. See “Error messages for AUTO SETUP”...

  • Page 40: Changing Osd Language

    CHANGING OSD LANGUAGE This feature allows you to select the language of your choice that appears in SET MENU of this unit. Set the operation mode selector to YSP. TV/AV Press MENU. The SET MENU screen appears on your TV. SET MENU ;MEMORY ;AUTO SETUP...

  • Page 41: Auto Setup (intellibeam), The Flow Chart Of Auto Setup

    AUTO SETUP (IntelliBeam) This unit creates a sound field by reflecting sound beams on the walls of your listening room and by broadening the cohesion of all the channels. Just as you would arrange the speaker position of other audio systems, you need to set the beam angle to enjoy the best possible sound from this unit.

  • Page 42: Installing The Intellibeam Microphone

    AUTO SETUP (IntelliBeam) Installing the IntelliBeam microphone The supplied IntelliBeam microphone collects and analyzes the sound that this unit produces in your actual listening environment. Follow the procedure below to connect the IntelliBeam microphone to this unit and make sure that the IntelliBeam microphone is placed in a proper location and that there are no large obstacles between the IntelliBeam microphone and the walls in your listening room.

  • Page 43: Using Auto Setup (intellibeam)

    Center line IntelliBeam microphone Assembling the supplied cardboard microphone stand You will find three separate parts (one circular part and two longitudinal parts) of the cardboard microphone stand originally put together. Disassemble the three parts of the cardboard microphone stand originally put together. Insert one of the longitudinal part into the crevice of the other longitudinal part.

  • Page 44

    AUTO SETUP (IntelliBeam) Notes • Make sure that your listening room is as quiet as possible while this unit is performing the AUTO SETUP procedure. • To achieve the best results possible, evacuate yourself from your listening room until the AUTO SETUP procedure is completed so that you may not obstruct the path of sound beams.

  • Page 45

    Press to select BEAM+SOUND OPTIMZ, BEAM OPTIMZ only, or SOUND OPTIMZ only and then press ENTER. The following screen appears on your TV. ENTER AUTO SETUP PREPARATION & CHECK Please connect the MIC. Please place the MIC at least 1.8m/6ft away from the YSP unit.

  • Page 46

    AUTO SETUP (IntelliBeam) Check that the following screen is displayed on your TV. The results of the AUTO SETUP procedure are displayed on your TV. Example 1 SHOW RESULT MEASUREMENT COMPLETE BEAM MODE :5 BEAM SUBWOOFER :NOT APPLICABLE [ENTER]:Save set-up. [RETURN]:Do not save set-up.

  • Page 47

    If the problem persists, contact the nearest authorized Yamaha service center for assistance. An internal system error occurred. Repeat the AUTO SETUP procedure.

  • Page 48: Using The System Memory, Convenient Usage Of The System Memory, Saving Settings

    USING THE SYSTEM MEMORY Convenient usage of the system memory You can save the current settings adjusted in SET MENU in the system memory of this unit. It is handy to save certain settings according to the varying conditions of your listening environment.

  • Page 49: Loading Settings

    Press to select MEMORY1, MEMORY2, or MEMORY3 and press ENTER. The following screen appears on your TV. ENTER ENTER 2)MEMORY SAVE MEMORY1 Save Now ? Push [ENTER] to Save Press ENTER again. The new parameters are saved as MEMORY1, MEMORY2, or MEMORY3. Once the parameters are saved, the display returns to the SET MENU screen.

  • Page 50

    Using the system memory Press to select LOAD and press ENTER. The following screen appears on your TV. ENTER 1)MEMORY LOAD MEMORY1 MEMORY2 MEMORY3 [ ]/[ ]:Select [ENTER]:Enter Press to select MEMORY1, MEMORY2, or MEMORY3 and press ENTER. The following screen appears on your TV. ENTER 1)MEMORY LOAD MEMORY1 Load Now ?

  • Page 51: Playback, Selecting The Input Source

    Selecting the input source You can play back sound from the components connected to this unit simply by pressing INPUT on the front panel repeatedly or pressing one of the input selector buttons (TV, STB, DVD, AUX1, AUX2, or AUX3) on the remote control.

  • Page 52: Playing Back Sources

    Playback Press AUX1 (or AUX2) to play back a component connected to the AUX 1 (or AUX 2) jack on the rear panel of this unit. AUX1 Press AUX3 to play back a component connected to the AUX 3 input jack on the front panel. AUX3 Playing back sources Once an input source is selected (see page 47), you can...

  • Page 53: Adjusting The Volume

    Adjusting the volume INPUT VOLUME STANDBY/ON VOLUME TV VOL MUTE TV INPUT TV MUTE Press VOLUME +/– to increase or decrease the volume level. The numeric value of the volume level appears in the front panel display. Control range: MIN (minimum), 01 to 99, MAX (maximum) VOLUME Front panel...

  • Page 54: Fm Tuning, Fm Controls And Functions

    FM TUNING There are two tuning methods: automatic and manual. Automatic tuning is effective when the radio signal is strong and there is no interference. If the radio signal is weak, tune into the FM station manually. You can also use the automatic and manual preset tuning features to store up to 40 stations in total (A1 to E8: 5 preset station groups with 8 preset station numbers each).

  • Page 55: Automatic Tuning, Manual Tuning

    Automatic tuning Automatic tuning is effective when the radio station signals are strong and there is no interference. Set the operation mode selector to TV/AV. TV/AV Press FM to select FM as the input source. “FM” appears in the front panel display. •...

  • Page 56: Automatic Preset Tuning

    FM tuning Press SEARCH repeatedly until the AUTO indicator disappears from the front panel display. SEARCH No colon (:) If a colon (:) appears in the front panel display, tuning is not available. Press PRESET/TUNE to turn the colon (:) off. Press ENTRY ) to tune into the desired station manually.

  • Page 57: Manual Preset Tuning

    Manual preset tuning You can also store up to 40 stations (A1 to E8: 5 preset station groups with 8 preset station numbers each) manually. Set the operation mode selector to TV/AV. TV/AV Tune into the desired FM station. See page 51 for tuning instructions. Press MEMORY.

  • Page 58: Selecting A Preset Station

    FM tuning Selecting a preset station You can tune into the preset stations simply by selecting the preset station groups and numbers. Set the operation mode selector to TV/AV. TV/AV Press FM to select FM as the input source. “FM” appears in the front panel display. •...

  • Page 59

    Tune into the desired Radio Data System broadcasting station. We recommend automatic preset tuning to tune into the Radio Data System broadcasting stations (see page 52). Note The AUTO PS feature of this unit changes the frequency display to the “PS” mode if the Radio Data System station broadcasts the PS data.

  • Page 60: Enjoying Surround Sound, Beam

    ENJOYING SURROUND SOUND You can enjoy multi-channel surround sound by changing the beam mode using the beam mode buttons on the remote control. Select 5 Beam, Stereo plus 3 Beam, 3 Beam, or My Surround for multi-channel playback. Notes • When ANGLE TO WALL OR CORNER is set in MANUAL SETUP (see page 78), 5 Beam and 3 Beam cannot be selected. •...

  • Page 61: Stereo Plus 3 Beam, Beam, My Surround

    Stereo plus 3 Beam Outputs normal sound from the front left and right channels and sound beams from the center and surround left and right channels. This mode is ideal for watching live recordings on a DVD. Vocals and instrumental sounds can be heard close to the center of the listening position while sound reflections from the venue itself can be heard on your right and left, giving you the feeling that you are...

  • Page 62

    Enjoying surround sound Decoder indicators Depending on the input source and the selected surround mode, the indicators in the front panel display light up as follows: Status When PCM signals are being input When DTS digital signals are being input When DTS Neo:6 is selected as the surround mode When Dolby Digital signals are...

  • Page 63: Enjoying 2-channel Sources In Surround Sound

    Enjoying 2-channel sources in surround sound This unit can decode 2-channel sources for 5.1-channel playback so that you can enjoy a variety of surround sound effects by switching the surround mode. The surround modes are available only when the CINEMA DSP programs are turned off (see page 69) or when the movie program is selected as the CINEMA DSP program (see page 68).

  • Page 64: Enjoying Tv In Surround Sound

    Enjoying surround sound Enjoying TV in surround sound You can enjoy analog audio signals output from your TV in real surround sound. Before performing the steps below, set the volume of this unit to 30. If necessary, adjust the volume level in step 4 below. INPUT1 MACRO PRESET/TUNE...

  • Page 65: Adjusting Surround Mode Parameters

    Adjusting surround mode parameters You can configure the parameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect. MUSIC MOVIE SPORTS SUR. DECODE ENHANCER ENTRY MENU TV/AV CAT/ ENTER DISPLAY RETURN (U.S.A. and Canada models) Repeat steps 1 and 2 in “Enjoying 2-channel sources in surround sound”...

  • Page 66: Enjoying Stereo Sound, Channel Stereo Playback, Channel Stereo Playback

    ENJOYING STEREO SOUND You can enjoy 2-channel and 5-channel stereo playback as the beam modes by pressing STEREO on the remote control. Notes • When you play back Dolby Digital audio signals in the 2-channel or 5-channel stereo playback, the dynamic range becomes compressed.

  • Page 67: Playing Back Sound Clearly (my Beam), Using Auto-adjust Function

    Playing back sound clearly (My Beam) You can improve listenability in a noisy environment by changing the beam mode to My Beam, which outputs sound beams directly toward the listening position in a single channel. In addition, My Beam is also ideal when you do not want the sound beams to be reflected on the walls in your listening room or when you do not want to disturb other people while enjoying music or movies at night.

  • Page 68: Using Manual-adjust Function

    Playing back sound clearly (My Beam) Using manual-adjust function You can adjust the beam angle manually while playing back an input source. This function is also ideal if the listening position is out of the operation guarantee range of the auto-adjust function. Set the operation mode selector to YSP.

  • Page 69: Using Sound Field Programs

    The acoustics in your room could be changed to those of a concert hall, a dance floor, or a listening room of virtually any size at all. This ability to create sound fields at will is exactly what Yamaha has done with the CINEMA DSP technology.

  • Page 70

    Using sound field programs Sound field program descriptions You can select from the following sound field programs based on your listening preference when you play music, movie or sports sources. For details on how to switch between the available sound field programs, see page 67. Note There is only one sports sound field program available.

  • Page 71: Cinema Dsp Programs

    CINEMA DSP programs You can select from three different CINEMA DSP programs (MUSIC, MOVIE, and SPORTS) depending on the type of source you want to enjoy. The CINEMA DSP indicator lights up in the front panel display when one of the CINEMA DSP programs is selected.

  • Page 72

    Using sound field programs Movie programs Select this CINEMA DSP program when you play back movie sources, especially the ones encoded in Dolby Digital, DTS, or Dolby Surround. This program clearly reproduces dialog and sound effects, thus creating a broad and expansive cinematic space amid silence.

  • Page 73

    Turning off CINEMA DSP programs Turn off the CINEMA DSP programs if you want to enjoy the original sound without the CINEMA DSP program effect. Set the operation mode selector to YSP. TV/AV Press OFF to turn off the CINEMA DSP programs.

  • Page 74: Using The Music Enhancer

    USING THE MUSIC ENHANCER You can use the Music Enhancer of this unit to improve the sound nearest to the original depth and width of compression artifacts such as the MP3 format. MUSIC MOVIE SPORTS SUR. DECODE ENHANCER MENU ENTRY TV/AV CAT/ ENTER...

  • Page 75

    (Night listening enhancer/TV volume equal mode) The night listening enhancers are designed to improve listenability at lower volumes or at night. In addition, you can limit the volume level of the TV so that it will not vary suddenly to a great extent whenever the contents being broadcast change (i.e.

  • Page 76: Using The Sleep Timer

    USING THE SLEEP TIMER Use this feature to automatically set this unit to the standby mode after a specified period of time. The sleep timer is useful if you are going to sleep after a certain amount of time while this unit is still playing back a source. PRESET/TUNE SEARCH MEMORY...

  • Page 77

    Canceling the sleep timer Set the operation mode selector to YSP. TV/AV Press SLEEP repeatedly until “SLEEP OFF” appears in the front panel display. SLEEP Wait for a few seconds without operating this unit to confirm the setting for the sleep timer. The SLEEP indicator disappears from the front panel display, indicating that the sleep timer is deactivated.

  • Page 78: Displaying The Input Source Information

    DISPLAYING THE INPUT SOURCE INFORMATION Displaying the input source information You can display the format and sampling frequency of the current input signal in the front panel display. SUR. DECODE ENHANCER ENTRY MENU CAT/ ENTER DISPLAY RETURN VOLUME TV VOL MUTE TV INPUT TV MUTE...

  • Page 79: Using The Hdmi Control Feature

    Using the HDMI control feature You can operate the following functions using the remote control supplied with your TV if this unit and an HDMI control-compatible TV (except some models) are connected via HDMI. • Turning on or off the power (synchronized operation with the TV) •...

  • Page 80

    MANUAL SETUP To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment parameters, as well as to make advanced settings for sound signals, sound beams, digital input, and the OSD. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your own listening environment. •...

  • Page 81: Using Manual Setup

    Using MANUAL SETUP Use the remote control to access and adjust each parameter. MUSIC MOVIE SPORTS SUR. DECODE ENHANCER ENTRY MENU TV/AV CAT/ ENTER DISPLAY RETURN VOLUME TV VOL (U.S.A. and Canada models) You can adjust the SET MENU parameters while the unit is reproducing sound.

  • Page 82: Beam Menu

    MANUAL SETUP BEAM MENU Use to manually adjust the various parameters related to the sound beam output. SET MENU MANUAL SETUP 2)BEAM MENU A)SETTING PARAMETERS B)BEAM ADJUSTMENT C)IMAGE LOCATION [ ]/[ ]:Up/Down [ENTER]:Enter You can adjust the sound beam output level of each channel in “Adjusting the audio balance”...

  • Page 83

    • Select ANGLE TO WALL OR CORNER if this unit is installed in the corner of your listening room. Adjust the width and length of your listening room as well as the distance of the listening position from this unit. Listening position from the unit Room width...

  • Page 84

    MANUAL SETUP HORIZONTAL ANGLE (Horizontal angle) Use to adjust the horizontal angle of sound beams for each channel. By adjusting the horizontal angle of the sound beams, you can optimize the sound beam paths. A test tone is automatically output. Choices: L90°...

  • Page 85

    FOCAL LENGTH (Focal length) Use to set the distance from the front of this unit to the focal point of output for each channel to achieve an expansive feeling for each channel. The focal points except for the center channel should be set near the reflection points on the walls.

  • Page 86: Sound Menu

    MANUAL SETUP IMAGE LOCATION (Image location) Use to adjust the direction from which the front left and right channel sound is heard so that each sound can be heard closer to the center channel. Use this feature to redirect audio signals if the sound coming from the front left and right channels seems unnatural, such as when your listening position is not the center of your listening room.

  • Page 87

    BASS OUT (Bass out) Low-frequency (bass) signals can be directed to the subwoofer and/or the front left and right channels. This setting also determines the routing of LFE (low-frequency effect) signals found in Dolby Digital or DTS sources. Choices: SWFR (Subwoofer), FRONT •...

  • Page 88: Input Menu

    MANUAL SETUP DD/DTS Dynamic Range (Dynamic range of Dolby Digital and DTS signals) Use to select the amount of dynamic range compression. This setting is effective only when the unit is decoding Dolby Digital and DTS signals. Dynamic range is the difference between the smallest sound that can be heard above the noise of the equipment and the biggest sound that can be heard without distortion.

  • Page 89

    A)INPUT ASSIGNMENT 1/3 HDMI HDMI1;;;; AUX1 AUX1 HDMI2;;;; DVD [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return A)INPUT ASSIGNMENT 2/3 COMPONENT Line1;;;;TV/STB ( TV/STB ) Line2;;;; DVD [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return A)INPUT ASSIGNMENT 3/3 COMPOSITE Line3;;;; AUX2 AUX2 [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return INPUT MODE (Input mode)

  • Page 90

    SUPPORT AUDIO (Support audio) Use to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack of this unit. Choices: YSP-4000, OTHER a)SUPPORT AUDIO YSP-4000 OTHER [ ]/[ ]:Select...

  • Page 91

    VIDEO INFO (Video information) Use to display the video information of the current input signal. Choices: HDMI SIGNAL, HDMI RES., HDMI ERROR b)VIDEO INFO HDMI SIGNAL;;;HDMI -> HDMI HDMI RES.;;;;1080P -> 1080P HDMI ERROR;;;---- [ ]/[ ]:Up/Down [ENTER]:Return • Select HDMI SIGNAL to display the type of the HDMI input/output signals.

  • Page 92: Display Menu

    MANUAL SETUP e)HDMI CONTROL XXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXX [ ]/[ ]:Select [ENTER]:Return • Select ON to enable the HDMI control. The signals input at the HDMI IN jacks are output at the HDMI OUT jack when this unit is in the standby mode. •...

  • Page 93

    OSD SET (OSD settings) Use to adjust the display position and to set the display time of the OSD. B)OSD SET OSD SHIFT;;;;;;;;;;0 OSD DISPLAY TIME;;;ON [ ]/[ ]:Up/Down [ ]/[ ]:Sel [ENTER]:Return OSD SHIFT (OSD shift) Use to adjust the vertical position of the OSD. Adjust toward the –...

  • Page 94: Adjusting The Audio Balance, Using The Test Tone

    Adjusting the audio balance Adjusting the audio balance You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more true-to-life surround sound experience. Using the test tone You can use the test tone feature to output a test tone from each channel to manually balance the channel levels.

  • Page 95: Using The Audio Output Being Played Back

    Press TEST when you have completed all your adjustments. TEST Notes • All channel levels cannot be adjusted when the 2-channel or 5-channel stereo playback (see page 62), My Beam (see page 63), or My Surround (see page 57) is selected as the beam mode.

  • Page 96

    Adjusting the audio balance Press to adjust the channel volume. ENTER Control range: –10.0 dB to +10.0 dB Wait for a few seconds without operating this unit when you have completed your adjustment. Notes • All channel levels cannot be adjusted when the 2-channel or 5-channel stereo playback (see page 62), or My Surround (see page 57) is selected as the beam mode.

  • Page 97: Selecting The Input Mode

    You can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source. This function is available for TV/STB, DVD, AUX1, and AUX2. We recommend setting the input mode to AUTO in most cases. DOCK AUX1 AUX2...

  • Page 98: Adjusting The System Parameters, Using The System Parameters

    Adjusting the system parameters Adjusting the system parameters This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to adjust and customize the way this unit operates. Note When “F.PANEL KEY” is set to “F.PANEL: OFF” (see page 100), STANDBY/ON on the front panel is ineffective. Use STANDBY/ON on the remote control instead to adjust the system parameters.

  • Page 99: Setting The Memory Protect

    Setting the MEMORY PROTECT You can protect the settings you saved in the system memory of this unit from being accidentally erased or unwantedly changed. Repeat steps 1 to 3 in “Using the system parameters” on page 94. Set the operation mode selector to YSP. TV/AV Confirm that “MEMORY PROTECT”...

  • Page 100: Setting The Max Volume, Setting The Turn On Volume

    Adjusting the system parameters Setting the MAX VOLUME You can set the maximum volume level so that this unit will not output sound beyond the limited volume level. Repeat steps 1 to 3 in “Using the system parameters” on page 94. Set the operation mode selector to YSP.

  • Page 101: Setting The Monitor Check

    Press so that “TURN ON VOLUME” is displayed in the front panel display. ENTER Press ENTER. ENTER Press to adjust the initial volume level. ENTER Control range: MAX, 99 to 01, OFF Control step: 1 Press STANDBY/ON on the remote control to set this unit to the standby mode.

  • Page 102: Setting The Demo Mode

    Adjusting the system parameters Press to switch between “MON CHK: YES” and “MON CHK: SKIP”. ENTER • Select MON CHK: YES to activate the monitor check function. • Select MON CHK: SKIP to deactivate the monitor check function. Press STANDBY/ON on the remote control to set this unit to the standby mode.

  • Page 103: Setting The Panel Input Key

    Press to switch between “DEMO: ON” and “DEMO: OFF”. ENTER • Select DEMO: ON to activate the demo mode. • Select DEMO: OFF to deactivate the demo mode. Press STANDBY/ON on the remote control to set this unit to the standby mode. STANDBY/ON The new setting will be activated when you turn on the power of this unit next time.

  • Page 104: Disabling The Front Panel Keys

    Adjusting the system parameters Press to switch between “P.INPUT: ON” and “P.INPUT: OFF”. ENTER • Select P.INPUT: ON to enable the INPUT key on the front panel. • Select P.INPUT: OFF to disable the INPUT key on the front panel. “F.PANEL KEY” is automatically set to “ON”.

  • Page 105: Setting The Factory Preset

    Press to switch between “F.PANEL: ON” and “F.PANEL: OFF”. ENTER • Select F.PANEL: ON to enable the front panel keys. • Select F.PANEL: OFF to disable the front panel keys. “P.INPUT” is automatically set to “ON”. Press STANDBY/ON on the remote control to set this unit to the standby mode.

  • Page 106

    Adjusting the system parameters Press to switch between “PRESET: RESET” and “PRESET: CANCEL”. ENTER • Select PRESET: RESET to reset all of the current settings. • Select PRESET: CANCEL to cancel the resetting procedure. Press STANDBY/ON on the remote control to set this unit to the standby mode.

  • Page 107: Remote Control Features, Setting Remote Control Codes

    In addition to controlling this unit, the remote control can also operate other AV components made by Yamaha and other manufacturers. To control other components, you must set up the remote control with the appropriate remote control codes and set the operation mode selector to TV/AV to change the control area.

  • Page 108: Controlling Other Components

    Remote control features Controlling other components Operating your TV Set the operation mode selector to TV/AV, and press TV to select TV as the input source. The control area of the remote control changes to the TV operation mode. TV/AV STANDBY/ON POWER POWER...

  • Page 109

    Operating your DVD player/recorder Set the operation mode selector to TV/AV and press DVD to select DVD as the input source. The control area of the remote control changes to the DVD operation mode. TV/AV STANDBY/ON POWER POWER DOCK AUX1 AUX2 AUX3 INPUT1...

  • Page 110

    Remote control features Operating your VCR Set the operation mode selector to TV/AV and press AUX1 to select VCR as the input source. The control area of the remote control changes to the AUX1 operation mode. This operation is available when your VCR is connected to the AUX 1 AUDIO IN jacks on this unit.

  • Page 111: Using The Tv Macro

    Using the TV macro The TV macro feature makes it possible to perform a series of operations with the press of a single button. For example, when you want to play a DVD, you would normally turn on the component, select DVD as the input source, and press the play button to start playback.

  • Page 112

    Remote control features Setting macros for the TV without the tuning capability Press and hold CODE SET and press one of the input selector buttons to select the input source you want to set macros for. Proceed to step 2 while holding down CODE SET. TV MUTE While holding down, press...

  • Page 113: Troubleshooting

    Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center. General...

  • Page 114

    No sound is heard from the The TV does not accept the multi-channel TV connected via HDMI. audio signals. “SUPPORT AUDIO” is set to “YSP-4000”. There is noise interference This unit is too close to the digital or high- from digital or high- frequency equipment.

  • Page 115

    Remote control Problem The remote control does not Wrong distance or angle. work and/or function properly. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. The batteries are weak. Cannot operate external The external component you want to operate components with the remote...

  • Page 116

    Troubleshooting FM tuner Problem FM stereo reception is noisy. The characteristics of FM stereo broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. There is distortion, and clear There is multi-path interference. reception cannot be obtained even with a good FM antenna.

  • Page 117: Glossary

    Dolby Digital Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front channels (left, center, and right) and 2 surround stereo channels, Dolby Digital provides 5 full-range audio channels. With an additional channel especially for bass effects, called LFE (low-frequency effect), the system has a total of 5.1-channels (LFE is counted as 0.1-channel).

  • Page 118

    Glossary LFE 0.1-channel This channel is for the reproduction of low bass signals. The frequency range for this channel is 20 Hz to 120 Hz. This channel is counted as 0.1 because it only enforces a low-frequency range compared to the full-range reproduction by the other 5/6 channels in Dolby Digital or DTS 5.1/6.1-channel systems.

  • Page 119: Index

    Numerics 3 Beam ... 57 5 Beam ... 56 AC power supply cable ... 31 Audio pin cable... 21 AUTO SETUP (IntelliBeam)... 37 Battery... 32 BEAM MENU ... 78 Beam mode ... 56, 62, 63 Cable clamp ... 21 Cardboard microphone stand... 39 CINEMA DSP ...

  • Page 120: Specifications

    Specifications AMP SECTION • Maximum Output Power (JEITA) ... 2 W (1 kHz, 10% THD, 4 ) 40 20 W (100 Hz, 10% THD, 4 ) SPEAKER SECTION • Driver Small dia. speakers ... 4 cm (1-9/16 in) cone magnetic shielding type 40 Woofers ...

  • Page 121

    THOMSON DUAL DWIN 293, 281 TOSHIBA EMERSON 297, 224, 239, 232 VIDECH FURGUSON 223, 265, 266 WARDS FIRST LINE YAMAHA FISHER 295, 233 FRABA YAMAJI FUJITSU ZENITH FUNAI 277, 278 293, 297, 234, DVD PLAYER 235, 236 GOODMANS 296, 298, 223...

  • Page 122

    744, 792, 793 SCIENTIFIC ATLANTA 752, 753, 754, 789 SONY 756, 757 TOCOM UNIVERSAL 769, 772, 773, 774, 775 VIEWSTAR 764, 766, 776, 777, 778, 779, 782 SATELLITE TUNER ECHOSTAR 837, 838, 839 GENERAL INSTRUMENT HITACHI HUGHES 843, 844, 845, 846 MAGNAVOX PANASONIC 826, 829...

  • Page 123

    YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA...

  • Page 124

    Reference Guide for iPod This is the Reference Guide for Yamaha YSP-4000 Digital Sound Projector. This guide explains the connections and operations of iPod and XM Satellite Radio (U.S.A. and Canada models only). Operations in this guide use keys on the supplied remote control unless otherwise specified.

  • Page 125

    USING IPOD™ This unit has the DOCK terminal on the rear panel that allows you to connect the Yamaha iPod universal dock (such as YDS-10, sold separately). Station your iPod in the Yamaha iPod universal dock, and use the supplied remote control to operate your iPod.

  • Page 126

    • For a complete list of status messages that appear in the front panel display and in the OSD, see the “iPod” section in “Troubleshooting” on page 11. • While your iPod is stationed in the Yamaha iPod universal dock connected to the DOCK terminal of this unit, your iPod battery is automatically charged as long as this unit is turned on.

  • Page 127

    “OSD SET” (OSD settings) in the owner’s manual (see page 89). Notes • The YAMAHA logo appears in the iPod screen in this mode. • Undisplayable characters are shown as underscores “_” in the front panel display and OSD.

  • Page 128

    XM™ Satellite Radio tuning (U.S.A. and Canada models only) About XM Satellite Radio XM Satellite Radio offers an extraordinary variety of commercial-free music, plus the best in sports, news, talk, and entertainment. XM is broadcast in superior digital audio from coast to coast. From rock to reggae, from classical to hip hop, XM has something for every music fan.

  • Page 129

    XM™ Satellite Radio tuning (U.S.A. and Canada models only) Activating XM™ Satellite Radio Once you have installed XM Mini-Tuner Home Dock, inserted XM Mini-Tuner, connected Home Dock to your XM READY home audio system, and installed the antenna, you are ready to subscribe and begin receiving XM programming.

  • Page 130

    Search for a desired channel by using one of the four XM Satellite Radio search modes: • To select a channel from all channels, see “All Channel Search mode” on this page. • To select a channel by channel category, see “Category Search mode”...

  • Page 131

    XM™ Satellite Radio tuning (U.S.A. and Canada models only) Preset Search mode Prior to selecting a preset channel in the Preset Search mode, you must preset the XM channels. For details, see “Presetting the XM™ Satellite Radio channels” on page 9. Press SEARCH repeatedly to select “PRESET SEARCH”.

  • Page 132

    Presetting the XM™ Satellite Radio channels You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 5 preset channel groups with 8 preset channel numbers each). You can then recall the preset channels easily by selecting the preset group and number as described in “Preset Search mode”...

  • Page 133

    XM™ Satellite Radio tuning (U.S.A. and Canada models only) Displaying the XM™ Satellite Radio information You can display the XM Satellite Radio information (channel number/channel name, channel category, and artist name/song or program title) for the currently selected channel in the front panel display or in the OSD. Note If a status or error message appears in the front panel display or in the OSD, see the “XM Satellite Radio (U.S.A.

  • Page 134

    If you experience a problem that is not listed below, or if the instruction below does not help, set this unit to the standby mode, disconnect the power supply cable, and contact the nearest authorized Yamaha dealer or service center.

  • Page 135

    YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA...

  • Page 136

    (Outputs DVD digital audio sounds 2 OSD video pin cable 5 AC power supply cable (Displays the DVD analog video the YSP-4000 menu (Connects this unit to the AC wall outlet) screen on the TV) 3 Optical cable (Outputs TV digital audio sounds...

  • Page 137

    Continued from the front Carry out the AUTO SETUP (IntelliBeam) Carry out the AUTO SETUP to adjust the settings that best match your listening environment The IntelliBeam technology allows you to achieve sound adjustments that best match your listening environment. It is normal for loud test tones to be output during the AUTO SETUP procedure.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: