Slipping Tracks - Yamaha D24 Owner's Manual

Slipping Tracks

The Track Slip function is used to modify a track's start time.
The following points, which can be adjusted in sub-frame steps, can be selected when
specifying a new start time: LAST REC IN, LAST REC OUT, A, B, or a locate memory
from 1 through 99. Note that you must set the point that you intend to use before enter-
ing the Track Slip function. See the Quick Locate Chapter on page 57 for more infor-
mation about setting these points.
For projects whose start time is "00:00:00.00," the specified point becomes the track's
new start time. For projects whose start time is not "00:00:00.00," the track's new start
time will be its current start time plus the value of the specified point.
Press the [EDIT] button.
1
The EDIT indicator lights up.
Use the JOG/DATA dial to select "TRACK EDIT," and then press the [ENTER]
2
button.
Use the JOG/DATA dial to select "SLIP," and then press the [ENTER] button.
3
"EDIT SLIP—TR nn" appears on the display ("nn" being the number of the track to be
slipped).
Use the JOG/DATA dial to select the track you want to slip.
4
You can select individual tracks, track pairs, or all tracks: 1–8, 1/2–7/8, or ALL. To slip
a virtual track, assign it to a main track first, and then slip the main track.
Press the [ENTER] button.
5
"EDIT SLIP—TO MARK" appears on the display.
Use the JOG/DATA dial to select one of the following points:
6
MARK IN —LAST REC IN point
MARK OUT —LAST REC OUT point
MARK A —A point
MARK B —B point
LOC MEM 01–99 —a locate memory from 1 through 99
Press the [ENTER] button.
7
"EDIT SLIP—TO 00:00:00.00.0" appears on the display ("00:00:00.00.0" being the
position of the selected point).
Use the JOG/DATA dial or keypad to adjust the position, and then press the
8
[ENTER] button.
"TRACK SLIP—ARE YOU SURE" appears on the display.
Press the [ENTER] button to slip the selected track, or the [CANCEL] button
9
to cancel.
The selected track is slipped.
When the slip operation is complete, "FINISHED" appears on the display and the
UNDO/REDO indicator lights up, indicating that it can be undone. See "Undoing a
Recording or Edit" on page 35 for more information.
To slip another track, press the [ENTER] button to return to step 4.
93
Slipping Tracks
D24—Owner's Manual