Keypad - Yamaha D24 Owner's Manual

18
Chapter 2—Touring the D24

Keypad

A
Keypad buttons
The keypad is used with various functions to enter time values, parameter values,
project numbers, locate memory numbers, and so on.
The [0/-] is used to enter the number "0" and to make values plus or minus.
B
PROJECT SELECT button & indicator
This button is used to select projects by number. The PROJECT SELECT indicator
lights up when the Project Select function is on. See "Selecting Projects Directly" on
page 59 for more information.
C
LOC MEM RECALL button & indicator
This button is used to recall locate memories. The LOC MEM RECALL indicator lights
up when the Locate Memory Recall function is on. See "Recalling Locate Points" on
page 66 for more information.
D
LOC MEM STORE button & indicator
This button is used to store locate memories. The LOC MEM STORE indicator lights
up when the Locate Memory Store function is on. See "Storing Locate Points" on page
64 for more information.
E
LOCATE button
This button is used to locate the position specified on the 2nd line of the display. See
"Locating Positions Directly" on page 63 and "Recalling Locate Points" on page 66 for
more information.
F
CANCEL button
This button is used to cancel functions and reset time values to zero on the 2nd line of
the display.
G
ENTER button
This button is used to select, confirm, and execute functions.
D24—Owner's Manual
7
4
1
1
0/-
CANCEL
PROJECT
8 9
SELECT
LOC MEM
5 6
RECALL
LOC MEM
2 3
STORE
ENTER LOCATE
6 7
2
3
4
5