Power Switch & Phones - Yamaha D24 Owner's Manual

14
Chapter 2—Touring the D24
O
STOP button
This button is used to stop playback, recording, rehearsal, rewind, and fast forward, and
to cancel the Rehearse Standby mode. The STOP button indicator lights up when the
D24 is stopped.
P
PLAY button
This button is used to start playback, punch out of recording or rehearsal, and in con-
junction with the [REC] and [REHE] buttons, punch in for recording or rehearsal,
respectively. The PLAY button indicator lights up during playback, recording, and
rehearsal.
Q
REC button
This button is used in conjunction with the [PLAY] button to start recording. The REC
button indicator lights up while recording. See "Recording" on page 29 for more infor-
mation.
Power Switch & Phones
A
POWER switch
This switch is used to turn on and off the D24. It's recessed to prevent accidental oper-
ation. See "Turning On & Off the D24" on page 24 for more information.
B
PHONES LEVEL control
This control is used to adjust the volume level of the phones. See "Monitoring" on page
42 for more information.
C
PHONES jack
A pair of stereo headphones can be connected to this stereo phone jack for monitoring.
See "Monitoring" on page 42 for more information.
The following illustration shows how the PHONES jack is wired.
D24—Owner's Manual
POWER
1
2
3
1/4" TRS phone plug
Ring (right)
Sleeve (ground)
ON OFF
0 10
PHONES
LEVEL
PHONES
Tip (left)