Table of Contents
Advertisement
182
Chapter 17—Digital Audio I/O
About mini YGDAI Cards
For analog and digital audio inputs and outputs, the D24 uses optional mini YGDAI
(Yamaha General Digital Audio Interface) cards, which offer several analog I/O options
and digital I/O support for all the popular digital audio interconnect formats:
AES/EBU, ADAT, and Tascam TDIF-1.
The same mini YGDAI cards are also used by the Yamaha 01V Digital Mixing Console.
Note that the single and double slot YGDAI cards used by the 02R and 03D are not
interchangeable with the mini YGDAI cards used by the D24 and 01V Digital Mixing
Console.
The following mini YGDAI cards are currently available. See the Yamaha Professional
Audio Web site at the address below for up-to-date news on mini YGDAI cards.
<http://www.yamaha.co.jp/product/proaudio/homeenglish/>
MY8-AD—8 Analog Inputs
The MY8-AD card provides eight balanced analog inputs via phone jack connectors,
with 20-bit 128-times oversampling A/D converters. One card is required to access the
D24's eight inputs.
MY4-AD—4 Analog Inputs (available spring '99)
The MY4-AD card provides four balanced analog inputs via female XLR connectors,
with 24-bit 128-times oversampling A/D converters. Two cards are required to access
the D24's eight inputs.
MY4-DA—4 Analog Outputs
The MY4-DA card provides four balanced analog outputs via male XLR connectors,
with 20-bit 128-times oversampling D/A converters. Two cards are required to access
the D24's eight outputs.
MY8-AT—ADAT
The MY8-AT card provides ADAT format digital I/O via two MultiChannel Optical
Digital Interface connectors, and supports 16-, 20-, and 24-bit wordlengths. One card
is required to access the D24's eight inputs and outputs.
MY8-AE—AES/EBU
The MY8-AE card provides AES/EBU format digital I/O via a 25-pin D-sub connector,
and supports 16-, 20-, and 24-bit wordlengths. One card is required to access the D24's
eight inputs and outputs. The MY8-AE can also be used for digital I/O in Dual
AES/EBU mode. See "Using Dual AES/EBU Mode" on page 186 for more information.
MY8-TD—Tascam TDIF-1
The MY8-TD card provides Tascam TDIF-1 format digital I/O via a 25-pin D-sub con-
nector, and supports 16-, 20-, and 24-bit wordlengths. One card is required to access
the D24's eight inputs and outputs. A BNC connector is provided for wordclock out-
put.
MY8-TD cards feature a device selector switch that should be set to match the device
being connected. EXT: 88 for use with a Tascam DA-88. INT: 38 for use with a Tascam
DA-38 or other device.
D24—Owner's Manual
Advertisement
Table of Contents
