Selecting Tracks; Selecting Tracks Directly; Selecting Indexes - Yamaha CDR1000 Owner's Manual

Selecting Tracks

Tracks can be selected using the PREV [
playback, or playback pause.
Use the PREV [
1
to select the top of the previous track.
Use the NEXT [
2
select the top of subsequent tracks.
The number of the selected track is displayed by the track counter.

Selecting Tracks Directly

Tracks can be selected directly using the number keypad on the remote controller dur-
ing stop, playback, or playback pause.
Use the number keypad on the remote controller to select tracks directly.
1
Use buttons [1] through [9] to select tracks 1 through 9. To select track 3, for example,
press button [3].
To select tracks 10 and higher, use the [+10] button to enter the first digit and buttons
[0] through [9] to enter the second digit. To select track 13, for example, press the [+10]
button followed by the [3] button.
The number of the selected track is displayed by the track counter.
If the specified track number is greater than the number of the last track, the last track
is selected.

Selecting Indexes

Indexes can be selected using the previous INDEX [
tons during playback or playback pause.
Use the previous INDEX [
1
Press again to select the top of the previous index.
Use the next INDEX [
2
again to select the top of subsequent indexes.
The number of the selected index is displayed by the index counter.
If the specified index cannot be found, the first index is selected.
] and NEXT [
] button to select the top of the current track. Press again
] button to select the top of the next track. Press again to
] button to select the top of the current index.
] button to select the top of the next index. Press
Selecting Tracks
] buttons during stop,
] and next INDEX [ ] but-
CDR1000—Owner's Manual
23