Modifying A Project's Start Time - Yamaha D24 Owner's Manual

Modifying a Project's Start Time

The TC Modify function is used to modify a project's start time, which is initially set
when a project is first recorded. See "Recording" on page 33 for more information.
Select the project whose start time you want to modify.
1
Press the [EDIT] button.
2
The EDIT indicator lights up.
Use the JOG/DATA dial to select "PROJECT EDIT," and then press the [ENTER]
3
button.
Use the JOG/DATA dial to select "TC MODIFY," and then press the [ENTER]
4
button.
"PROJ TC MOD—00:00:00.00.0" appears on the display.
Use the JOG/DATA dial or keypad to enter a new start time.
5
The default setting is 00:00:00.00.0.
The current position can be captured by pressing the [CAPTURE] button and adjusted
in sub-frame steps using the JOG/DATA dial.
Press the [ENTER] button.
6
"PROJ TC MOD—ARE YOU SURE" appears on the display.
Press the [ENTER] button to fix the entered start time.
7
Press the [ENTER] button to modify the start time of the selected project, or
8
the [CANCEL] button to cancel.
The start time of the selected project is modified.
When the timecode modify operation is complete, "FINISHED" appears on the display.
Press the [EDIT] button to leave edit.
9
The EDIT indicator goes out.
In the following example, the project's start time is modified from 00:00:00.00 to
00:10:00.00.
00:00:00.00
00:10:00.00
Modifying a Project's Start Time
01 PROJECT
Timecode modified
to 00:10:00.00
01 PROJECT
83
00:05:00.00
00:15:00.00
D24—Owner's Manual