174
Chapter 15—Other Functions
Ejecting Troublesome Disks (emergency use)
If the D24 is turned off inadvertently, or the disk loading mechanism fails, you may not
be able to eject a disk in the normal way. In this case, the disk can be ejected using the
supplied disk eject tool. Note that this technique should only be used as a last resort, as
frequent use may lead to malfunction.
Turn off the D24.
1
Insert the disk eject tool into the manual eject hole, as shown below, and push
2
gently to eject the disk.
The disk ejects.
3
If the disk cannot be ejected, see your Yamaha dealer.
D24—Owner's Manual