Erasing The Repeated Portion (Ab) - Boss BR-600 Owner's Manual

3
Press CURSOR [ ] [
"ERS," and press [ENTER].
fig.02-520
4
Turn the TIME/VALUE dial to select "TME/MES"
and press [ENTER].
fig.02-530
5
Use CURSOR [ ] [
to select the track/V-Track to erase from.
6
Press [ENTER].
fig.02-540
7
Use [CURSOR] and the TIME/VALUE dial to specify
the beginning of the portion "S" (Start) of data you
want to erase.
8
Press [ENTER].
fig.02-348d4
9
Use [CURSOR] and the TIME/VALUE dial to specify the
ending of the portion "E" (End) of data you want to erase.
10
When you are ready to execute the erasure, press [ENTER].
The display will ask "Are you sure?," so that you can
confirm the operation.
11
Press [ENTER].
The erasure is executed.
] to move the cursor to
] and the TIME/VALUE dial
Editing the Performance on a Track (Track Edit)
12
Press [UTILITY] (or press [EXIT] repeatedly) to
return to the Play screen.
* During updating, "Keep power on!" appears in the upper
line of the display, while the lower line shows what is being
processed.
After specifying the time in the procedure above, a "+"
may appear to show that there is a discrepancy between
the actual current position and the position displayed. If
you specify the locations using measures, specify the
locations at each screen using the TIME/VALUE dial to
eliminate the discrepancy.
You can also enter the time using [LOCATOR], [ZERO], [STOP]
+ [REW], [STOP] + [FF], and AUTO PUNCH [IN/OUT].
Erasing the repeated
■
portion (AB)
Perform the procedure given below to erase the portion
from the repeat start (A) to the repeat end (B).
fig.02-460
Repeat
Start (A)
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [
"TRK," and press [ENTER].
fig.02-470
Repeat Time
End (B)
] [ ] to move the cursor to
83