Creating Patterns By Tapping The Drum Pads (Realtime Recording) - Boss BR-600 Owner's Manual

Creating Patterns by Tapping the Drum Pads
(Realtime Recording)
1
Confirm that [PAD] is not lit, then press [PATTERN].
[PATTERN] and [RHYTHM ON/OFF] light.
2
Press [RHYTHM EDIT].
[PAD] lights up, indicating that the drum pads are
enabled for use.
fig.04-320
3
Use CURSOR [ ] [
to select a song pattern (S001 – 100).
* You cannot record to the preset patterns.
4
Press CURSOR [ ] [
"REAL," and press [ENTER].
The Recording Standby screen appears in the display.
fig.04-330
Measure
Time Signature Quantize
] and the TIME/VALUE dial
] to move the cursor to
Tempo
Creating Original Patterns
5
Use CURSOR [ ] [
to set the measure, beat, and click from which to start
recording of the pattern.
Measure
This sets the number of measures in the pattern to be
recorded.
Valid Settings : 1 – 999
Tempo
When recording, this sets the tempo for confirming the
pattern.
Valid Settings : 25.0 – 250.0
* The tempo setting here is exclusively for confirmation
of the pattern recording. This tempo is not stored in the
pattern (you cannot make any individual tempo
settings for the patterns themselves).
Time Signature
This sets the time signature (i.e., the beat) for the
pattern to be recorded.
Valid Settings : 1/1 – 8/1, 1/2 – 8/2, 1/4 – 8/4, 1/8 – 8/8
Quantize
This sets the recording quantization.
Setting Quantize lets you to have the sounds being
input conform to preset note lengths, thus eliminating
discrepancies in the input timing.
* Press "HI" you want to keep the timing used to input
the sounds.
Valid Settings :
Quarter note
Quarter-note triplet
Eighth note
Eighth-note triplet
Sixteenth note
] and the TIME/VALUE dial
Sixteenth-note triplet
Thirty-second note
Thirty-second-note triplet
HI
145