Rehearsing Recordings - Boss BR-600 Owner's Manual

Creating Original Patterns
6
Press CURSOR [
[ENTER].
A one-measure count-in is played, and then Realtime
Recording starts.
* You can also start Realtime Recording by pressing the
[REC] button.
7
Input the drum sounds by tapping the drum pads at
the desired timing.
8
Readjust the tempo and/or Quantize settings as
necessary.
9
When you have finished inputting the data, press
[EXIT].
* You can press [STOP] instead.
146
] [ ] to select "REC," and press

Rehearsing Recordings

You can practice (rehearse) your performances along with
the metronome before carrying out Realtime Recording.
During rehearsals, the drum sounds are only played, not
recorded to the pattern, when you press the drum pads.
1
Confirm that [PAD] is not lit, then press [PATTERN].
[PATTERN] and [RHYTHM ON/OFF] light.
2
Press [RHYTHM EDIT].
[PAD] lights up, indicating that the drum pads are
enabled for use.
fig.04-340
3
Press CURSOR [
"REAL," and press [ENTER].
The Recording Standby screen appears in the display.
4
Press CURSOR [
cursor to "RHR," and press [ENTER].
The BR-600 is put into Rehearsal mode.
fig.04-360
5
Tap the drum pads to practice the performance.
The drum sounds are played but not recorded to the
pattern.
6
When you have finished rehearsing, move the cursor
to "[STOP]," and press [ENTER].
* You can press [STOP] instead.
] [ ] to move the cursor to
] [ ] repeatedly to move the